Sure.
======below is my syslog-ng.conf file=====
# cat syslog-ng.conf
@version:3.7
@include "scl.conf"
# syslog-ng configuration file.
#
# This should behave pretty much like the original syslog on RedHat. But
# it could be configured a lot smarter.
#
# See syslog-ng(8) and syslog-ng.conf(5) for more information.
#
# Note: it also sources additional configuration files (*.conf)
# located in /etc/syslog-ng/conf.d/
options {
flush_lines (0);
time_reopen (10);
log_fifo_size (1000);
chain_hostnames (off);
use_dns (no);
use_fqdn (no);
create_dirs (no);
keep_hostname (yes);
};
source s_sys {
system();
internal();
# udp(ip(0.0.0.0) port(514));
};
destination d_cons { file("/dev/console"); };
destination d_mesg { file("/var/log/messages"); };
destination d_auth { file("/var/log/secure"); };
destination d_mail { file("/var/log/maillog" flush_lines(10)); };
destination d_spol { file("/var/log/spooler"); };
destination d_boot { file("/var/log/boot.log"); };
destination d_cron { file("/var/log/cron"); };
destination d_kern { file("/var/log/kern"); };
destination d_mlal { usertty("*"); };
filter f_kernel { facility(kern); };
filter f_default { level(info..emerg) and
not (facility(mail)
or facility(authpriv)
or facility(cron)); };
filter f_auth { facility(authpriv); };
filter f_mail { facility(mail); };
filter f_emergency { level(emerg); };
filter f_news { facility(uucp) or
(facility(news)
and level(crit..emerg)); };
filter f_boot { facility(local7); };
filter f_cron { facility(cron); };
#log { source(s_sys); filter(f_kernel); destination(d_cons); };
log { source(s_sys); filter(f_kernel); destination(d_kern); };
log { source(s_sys); filter(f_default); destination(d_mesg); };
log { source(s_sys); filter(f_auth); destination(d_auth); };
log { source(s_sys); filter(f_mail); destination(d_mail); };
log { source(s_sys); filter(f_emergency); destination(d_mlal); };
log { source(s_sys); filter(f_news); destination(d_spol); };
log { source(s_sys); filter(f_boot); destination(d_boot); };
log { source(s_sys); filter(f_cron); destination(d_cron); };
# Source additional configuration files (.conf extension only)
@include "/etc/syslog-ng/conf.d/*.conf"
# vim:ft=syslog-ng:ai:si:ts=4:sw=4:et:
[root@syslogng syslog-ng]#
==========below is my graylog.conf =========================
cat graylog.conf
# Define TCP syslog destination.
source s_net {
# udp(ip(0.0.0.0) port(514));
tcp(ip(0.0.0.0) port(5514));
};
destination d_lab_graylog {
syslog("graylog.lab.xxx.xxx" port(5514));
};
# Tell syslog-ng to send data from source s_src to the newly defined syslog
destination.
log {
source(s_net); # Defined in the default syslog-ng configuration.
destination(d_lab_graylog);
};
On Tuesday, January 17, 2017 at 9:19:59 PM UTC-6, Richard S. Westmoreland
wrote:
>
> Can you paste your filter, destination and log statement for sending to
> graylog?
>
>
>
--
You received this message because you are subscribed to the Google Groups
"Graylog Users" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
To view this discussion on the web visit
https://groups.google.com/d/msgid/graylog2/2b3e1196-5f77-4366-8896-c74a9ae945be%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
