Mark,
It sounds like you have installed TexLive 2012 using the backport ppa.
Let's start with the assumption that this is not the cause of your
problem.
The first thing we need to establish is whether you installed gregorio
from .deb packages or from source. You can find out by typing
dpkg-query -l 'gregorio*'
If this command returns any packages, then you installed from .deb
packages. Otherwise, you installed from source.
The directions for installation of gregorio are at
http://home.gna.org/gregorio/installation-linux.
If you have installed from .deb packages, you want to be sure that you
have installed BOTH .deb packages for gregorio. Follow the directions
for "Debian and Ubuntu systems" on that page: obtain, rebuild, and
reinstall BOTH gregorio .deb packages.
If you installed from source, follow the directions for "other GNU/Linux
systems" on that page: obtain, autoconf, configure, rebuild, and
reinstall. Note especially that there are TWO "make install" commands
that must be run to properly install gregorio.
If this doesn't resolve your problem, then run
kpsewhich -all gregoriotex.sty
and
locate gregoriotex.sty
and report the results back here.
Henry
On Monday, 02 September 2013 at 12:08:55 pm -0700, Mark M wrote:
> Henry,
>
> It was the latest version of gregorio. At this point I dont remeber
> where I pulled it from...(the gregorio website, or a repository). I tried
> to go back a version and I get the same error. I am on ubuntu 12.04. If I
> could get texlive and gregorio ...I am not sure where to pull them from,
> that will work with ubuntu 12 then i could just reload everything form
> scratch. There seems to be a lot of info out there but it is confusing. I
> know ubuntu is still using the older version of texlive(2009) I used the
> backport ppa to 2012 and that may be part of the problem.
>
> Mark
>
>
> On Mon, Sep 2, 2013 at 11:17 AM, Henry T. So Jr. <[email protected]> wrote:
>
> > How did you install gregorio?
> >
> > Henry
> >
> > On September 1, 2013 4:58:51 PM Mark M ** wrote:
> >
> > Hi,
> >
> > I have the following error, if anyone has a solution that would be
> > great. I have used ubuntu before with no problems but I had to redo it to
> > a larger drive and it seems to have gone amiss
> >
> > ! LaTeX Error: File `gregoriotex.sty' not found.
> >
> >
> > Type X to quit or <RETURN> to proceed,
> >
> > or enter new name. (Default extension: sty)
> >
> >
> > Enter file name:
> >
> > ! Emergency stop.
> >
> > <read *>
> >
> > l.7 \author
> >
> > {Scribus}
> >
> > 235 words of node memory still in use:
> >
> > 1 hlist, 1 rule, 38 glue_spec, 1 write, 1 dir nodes
> >
> > avail lists: 2:12,3:1,4:2,6:2,7:1,9:3
> >
> > ! ==> Fatal error occurred, no output PDF file produced!
> >
> > Transcript written on scribus_temp_render_j18808.log.
> >
> > calling 'gregorio /tmp/scribus_temp_render_j18808-score.gabc'
> >
> >
> > calling 'lualatex --interaction nonstopmode scribus_temp_render_j18808.tex'
> >
> >
> >
> > thanks for any help
> >
> > Mark
> >
> >
> >
> >
_______________________________________________
Gregorio-users mailing list
[email protected]
https://mail.gna.org/listinfo/gregorio-users
