* John G. Heim wrote [15.12.11 01:24]: > I'm guessing I'm doing something wrong. Here's the contents of > /proc/cmdline... Note that it does not contain what I typed. I think
It actually contains your ssh=bogus entry which is correct. I just downloaded grml64-2011.12-rc1 and it works for me. > the problem is that I have to press some down arrows and/or tabs > when the disk stops spinning. I have just been typing my grml > command... Grml switched to a graphical menu a while ago. You just have to press tab and enter the addtional boot parameters like ssh=bogus which you did according to the content below. You do not have to add the grml paramer like you did but there is no harm if you do it. > initrd=/boot/grml/initrd.gz boot=live bootid=grml201112rc1 > apm=power-off vga=791 quiet nomce grml ssh=bogus > BOOT_IMAGE=/boot/grml/linux26 It seems that this is the correct commandline. I just tested it and it works for me. Is there maybe a firewall in between? Otherwise can you test if there is a sshd running on the machine with pidof sshd? You can also try to access the ssh daemon from the machine itself with: ssh [email protected] which should ask for the password of the host. > >We are currently thinking about adding a beep after the bootloader is > >loaded. Hopefully this will help to add customized parameters to the > >commandline. > > > That would be very nice. You can test and use a test version from http://jenkins.grml.org/job/grml-full-amd64/760/artifact/2011-12-15_00-04-14/grml_isos/autobuild_2011-12-15_00-04-14.iso which should contain the beep in the bootloader. This is atm untested. Please be aware that this iso is a 64bit one. I can't offer you a 32bit one. Ulrich -- twitter: @mr_ud | identica: @mru IRCNet: mru | freenode: mrud _______________________________________________ Grml mailing list - [email protected] http://ml.grml.org/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://blog.grml.org/
