Hi, I have grml installed on my ThinkPad (grml2hd 05/16/2011), and am having trouble getting modules to load & services to start at boot. I did:
# echo tp_smapi >> /etc/modules But after booting, tp_smapi is not present and I end up having to manually load it. There's a post from 2005 [1] that says the solution is to activate /etc/init.d/module-init-tools in /etc/runlevel.conf. Is this still required? If so, as I don't see module-init-tools in that file, I'm wondering where in the lineup should it should be and at which runlevels it should start. Also, I added these lines to /etc/sysfs.conf : devices/platform/smapi/BAT0/start_charge_thresh=82 devices/platform/smapi/BAT0/stop_charge_thresh=92 vm.swappiness=5 But those values are not reflected after reboot: # cat /sys/devices/platform/smapi/BAT0/*_charge_thresh 89 96 # cat /proc/sys/vm/swappiness 60 So they have to be set manually: # echo 82 > /sys/devices/platform/smapi/BAT0/start_charge_thresh # echo 92 > /sys/devices/platform/smapi/BAT0/stop_charge_thresh # sysctl vm.swappiness=5 To start postfix I added this line to /etc/init.d/bootlocal.first : /etc/init.d/postfix restart But postfix doesn't start up at boot. Thanks for any suggestions on how to set these things up properly. [1] http://ml.grml.org/pipermail/grml/2005-November/008349.html Regards, John -- John Magolske http://B79.net/contact _______________________________________________ Grml mailing list - [email protected] http://ml.grml.org/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://blog.grml.org/
