thank you for that fast answer. now i've upgraded the hole distro, but monitor mode won't work. if i use modinfo, the module seems to use the driver from 2.6.16-kernel.
what i have to do now ? do i have to recompile the module, or how to load the correct version of the module ? thanks, again... > * carli graph wrote [03.11.06 11:35]: > Hi, >> i have [EMAIL PROTECTED], ipw2200 modules -1.0.8 with >> linux-headers-2.6.16-grml, >> so >> i think it's grml 0.7 and don't know witch driverversion... > > modinfo ipw2200 > >> and monitor mode doesn't work: >> >> # iwconfig eth0 mode monitor >> Error for wireless request "Set Mode" (8B06) : >> SET failed on device eth0 ; Invalid argument. >> >> please, does anyone know how to get working this? > > Use a newer kernel, or just run apt-get update && apt-get dist-upgrade > The upgrade should run without any problems. > > The problem is, that in this kernel release the monitor mode isn't > enabled in the source, so you could not put the card in the monitor mode > if you are using the ipw2200 driver from vanilla. You have to manually > patch the source, build you're own driver, or upgrade :) > > >> thanks, markus. > > Uli > -- > WARNING: RAID-6 is currently highly experimental. If you use it, there is > no guarantee whatsoever that it won't destroy your data, eat your disk > drives, > insult your mother, or re-appoint George W. Bush. > /usr/src/linux/drivers/md/Kconfig - 2.6.8 > _______________________________________________ > Grml mailing list - [email protected] > http://lists.mur.at/mailman/listinfo/grml > join #grml on irc.freenode.org > grml-devel-blog: http://grml.supersized.org/ > _______________________________________________ Grml mailing list - [email protected] http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
