Hi
after having successfully installed kernel 2.6.18-grml and a sarge base
configuration via the grml-skript I have stopped working on this
notebook.
Now I take up on this again : It loads only few modules, so no network,
no periphery: just the 6 shells and the ipv6 module is loaded.
/sys/module is rather empty : about 15 modules are listed , for HDD,
CDROM and video,
while at the funkentzutzler there are 74 modules listed.
the line "populating /dev" does not show up in dmesg when doing the
boot.
It seems that some skripts must be added to my installation to get the
kernel scan its periphery.
a shortened diff ps(grml0.8,left) ps(kernel2.6.18-grml+sarge,right) is
added:
PID TTY STAT COMMAND PID TTY STAT COMMAND
1 ? Ss init [2] | 1 ? Ss init [2]
2 ? S [migration/0] 2 ? S [migration/0]
3 ? SN [ksoftirqd/0] 3 ? SN [ksoftirqd/0]
4 ? S [watchdog/0] 4 ? S [watchdog/0]
5 ? S< [events/0] 5 ? S< [events/0]
6 ? S< [khelper] 6 ? S< [khelper]
7 ? S< [kthread] 7 ? S< [kthread]
9 ? S< [kblockd/0] | 10 ? S< [kblockd/0]
10 ? S< [kacpid] | 11 ? S< [kacpid]
94 ? S< [kseriod] | 96 ? S< [cqueue/0]
148 ? S [pdflush] | 97 ? S< [kseriod]
149 ? S [pdflush] | 157 ? S [pdflush]
150 ? S [kswapd0] | 158 ? S [pdflush]
151 ? S< [aio/0] | 159 ? S< [kswapd0]
152 ? S< [jfsIO] | 160 ? S< [aio/0]
153 ? S< [jfsCommit] | 161 ? S< [jfsIO]
154 ? S< [jfsSync] | 162 ? S< [jfsCommit]
155 ? S< [xfslogd/0] | 163 ? S< [jfsSync]
156 ? S< [xfsdatad/0] | 164 ? S< [xfslogd/0]
745 ? S< [cqueue/0] | 165 ? S< [xfsdatad/0]
757 ? S< [kpsmoused] | 294 ? S< [kpsmoused]
832 ? S< [ata/0] | 384 ? S< [ata/0]
841 ? S< [scsi_eh_0] | 385 ? S< [ata_aux]
842 ? S< [scsi_eh_1] | 394 ? S< [scsi_eh_0]
868 ? S< [kcryptd/0] | 395 ? S< [scsi_eh_1]
869 ? S< [kmirrord] | 416 ? S< [kcryptd/0]
943 ? S< [khubd] | 417 ? S< [kmirrord]
989 ? S< [scsi_eh_2] | 423 ? S< [kjournald]
990 ? S< [usb-storage] | 807 ? Ss /sbin/syslogd
1944 ? S< [loop0] | 810 ? Ss /sbin/klogd
2215 ? S<s udevd --daemon | 842 ? Ss /usr/sbin/exim4 -bd
-q30m
3837 ? S [khpsbpkt] | 848 ? Ss /usr/sbin/inetd
3934 ? S [pccardd] | 855 ? Ss /usr/sbin/sshd
3935 ? S [knodemgrd_0] | 868 ? Ss /sbin/mdadm -F
-i /var/run/mdadm.p
3993 ? S< [shpchpd] | 871 ? Ss /usr/sbin/atd
4017 ? S< [kgameportd] | 874 ? Ss /usr/sbin/cron
4504 ? Ss /usr/sbin/acpid -c /etc/acpi/event
| 882 tty1 Ss -bash
4625 ? SNs pump -i eth0 | 885 tty2 Ss+ /sbin/getty 38400 tty2
4680 ? SNs /sbin/syslog-ng -p /var/run/syslog
| 886 tty3 Ss+ /sbin/getty 38400 tty3
4695 ? SNs /usr/sbin/powernowd -q
| 887 tty4 Ss+ /sbin/getty 38400 tty4
4719 ? SNs /usr/sbin/gpm -m /dev/psaux -t aut
| 888 tty5 Ss+ /sbin/getty 38400 tty5
4759 tty1 Ss /bin/zsh -l | 889 tty6 Ss+ /sbin/getty 38400 tty6
4760 tty2 Ss+ /bin/dash /usr/bin/grml-init-scree
| 910 tty1 R+ ps ax
4761 tty3 Ss+ /bin/dash /usr/bin/grml-init-scree <
4762 tty4 Ss+ 0:00 /bin/zsh <
4763 tty5 Ss+ 0:00 /bin/zsh <
4766 tty6 Ss+ 0:00 /bin/zsh <
4767 tty9 Ss+ 0:00 /sbin/getty 38400 tty9 <
4768 tty10 Ss+ 0:00 /bin/zsh --login -c /usr/bin/iptst <
4771 tty11 Ss+ 0:00 /bin/zsh --login -c /usr/bin/htop <
4774 tty12 Ss+ 0:00 /bin/zsh --login -c /usr/bin/multi <
4822 tty10 S+ 0:00 /usr/bin/iptstate <
4824 tty11 S+ 0:33 /usr/bin/htop <
4825 tty12 S+ 0:00 /usr/bin/multitail /var/log/syslog <
4834 tty12 S 0:00 tail -48lf /var/log/syslog <
4841 tty2 S+ 0:00 /usr/bin/screen -c /etc/grml/scree <
4845 ? Ss 0:00 /usr/bin/SCREEN -c /etc/grml/scree <
4848 tty3 S+ 0:00 /usr/bin/screen -c /etc/grml/scree <
4849 ? Ss 0:00 /usr/bin/SCREEN -c /etc/grml/scree <
4869 pts/0 Ss+ 0:00 zsh <
4873 pts/1 Ss+ 0:00 zsh <
5059 ? S< 0:00 [kjournald] <
5078 ? S< 0:00 [kjournald] <
5219 tty1 R+ 0:00 ps ax <
>From the process numbers I see that a lot of transient processes did not
happen on my install, and usb-storage, cqueued, loop0, udevd do not
exist thereafter.
best regards
--
Erich Minderlein <[EMAIL PROTECTED]>
MARC Mannheim Rail Commerce GmbH
_______________________________________________
Grml mailing list - [email protected]
http://lists.mur.at/mailman/listinfo/grml
join #grml on irc.freenode.org
grml-devel-blog: http://grml.supersized.org/
