Thanks, Mika - you solved the problem as usual -
now, with the addition of ide0=noprobe and ide1=noprobe to lilo, which counters the kernel's preference to load ide first, and the (correct, I hope) UUID - [EMAIL PROTECTED] ~ % cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: ATA Model: HTS726060M9AT00 Rev: MH4O Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: _NEC Model: DVD+-RW ND-6500A Rev: 203D Type: CD-ROM ANSI SCSI revision: 05 [EMAIL PROTECTED] ~ % uname -a Linux mygrml1 2.6.22-grml #1 SMP PREEMPT Tue Jul 10 00:35:57 CEST 2007 i686 GNU/Linux [EMAIL PROTECTED] ~ % su Password: [EMAIL PROTECTED] /home/yazdzik # hdparm -T /dev/sda4 /dev/sda4: Timing cached reads: 1916 MB in 2.00 seconds = 958.54 MB/sec [EMAIL PROTECTED] /home/yazdzik # Mika, you are a genius, and I can go on trying to experiment with things I should not really touch. The experimental grml 1.0 is so attractive, however, I am thinking of taking the plunge, now that everything works, and redoing the whole network. At any rate, you have once again proven that intelligence and kindness to newbies overcomes just about any issue that can arise. Greetings from New York, and much gratitude. Your, Martin
_______________________________________________ Grml mailing list - [email protected] http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
