* Dietmar Segbert <[EMAIL PROTECTED]> [20080322 15:28]: > to have sound on my pc i must start the sound-module before the paport- > modules (parport, parport-pc). > In the alsa-base i have added the line
> options snd-sb16 isapnp=0 irq=7 dma8=1 dma16=5 port=0x2000 > If i remove parport-pc, parport and start the sound via modprobe snd-sb16, > the sound works. > what can i do, that the sound will be loaded before the parport-modules? Try adding snd-sb16 to /etc/modules. > Also the tulip driver will be loaded automaticly and the dmfe module after > the tulip-module. For my onboard networkcard i only use dmfe. I have added > a line in /etc/modprobe.d/blacklist: > blacklist tulip > But the tulip-moudle will be loaded. What can i do, that the tulip-module > will not be loaded? Try adding: alias tulip off to your /etc/modprobe.d/blacklist as well (that's the trick grml's "blacklist" command does additionally to the simple "blacklist" statement). > I have connected a dsl-modem to my ethernetcard. On slackware i start the > dsl-connection with adsl-start. I have run pppoeconf, but pppoeconf did > not create the /etc/ppp/pppoe.conf file. I also have started netcardconf, > but without success. > what are the steps to become a connection over the dsl-modem to the > internet IIRC pppoe-setup can generate a /etc/ppp/pppoe.conf file. regards, -mika- -- http://grml.org/ # Linux for texttool-users and sysadmins http://wiki.grml.org/ # share your knowledge http://grml.supersized.org/ # the grml development weblog #grml @ irc.freenode.org # meet us on irc
signature.asc
Description: Digital signature
_______________________________________________ Grml mailing list - [email protected] http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
