> > I'm installing grml 1.1 on an HP tc1100 tablet. The Hard drive > > has been replaced with a 12GB CF card (SanDisk Extreme III). > > > I stepped through the grml2hd process selecting all the defaults. > > When booting, after the splash screen, this message comes up and > > the machine hangs: > > > Loading 2.6.20-grmlEBDA is big; kernel setup stack > > overlaps LILO second stage > > grml 1.1 and kernel 2.6.20-grml? Are you sure about the version > numbers?
Ah, that's a good clue! On this CF card I'd previously installed grml 1.0, and must have installed the bootmanager into the MBR of /dev/hda. With grml 1.1, I installed the bootmanager into partition /dev/hda1. Re-running grml2hd & installing the bootmanager into the MBR solves the problem. Thanks for the speedy response, John -- John Magolske http://B79.net/contact _______________________________________________ Grml mailing list - [email protected] http://lists.mur.at/mailman/listinfo/grml join #grml on irc.freenode.org grml-devel-blog: http://grml.supersized.org/
