Hello everyone!
Maybe this is not the right way to ask general user question (wrong mail list
or something) so I'm sorry if made any problems.
I have an urgent situation to make ad-hoc openvpn server from usb stick. Using
grml for some time as a live cd and recovery tool I think this can be done with
grml.
So I have openvpn folder with all the necesary stuff, I formatted usb stick in
following way:
1. 3GB FAT32 wiht grml on it (grml2usb --bootoptions="nodhcp") /dev/sdb1
2 1GB ext3 with GRMLCFG label with scripts dir and inside it grml.sh script
/dev/sdb5
grml.sh script is chmod 755, so executable and readable by everyone.
basicaly the content of script is:
#!/bin/bash
ip link set dev eth0 up
ip addr add dev eth0 192.168.1.253/24
ip route add default via 192.168.1.254
#now I wont to copy the folder to rw fs in order to write status files and logs
so
cp -r /mnt/grmlcfg/openvpn /root/
cd /root/openvpn
openvpn --config /root/openvpn/server.conf &
echo 1 > /proc/sys/net/ipv4/ip_forward
#and to start ssh server to access the box
/etc/init.d/ssh start
The debug output says that GRMLCFG is detected and mounted to /mnt/grmlcfg as ro
When booting finished, nothing has happened, as the script had not been run.
Can anybody shed some light on this please?
Thank You.
_______________________________________________
Grml mailing list - [email protected]
http://lists.mur.at/mailman/listinfo/grml
join #grml on irc.freenode.org
grml-devel-blog: http://grml.supersized.org/
