This bug was fixed in the package pciutils - 1:3.3.1-1.1ubuntu4.1
---------------
pciutils (1:3.3.1-1.1ubuntu4.1) yakkety; urgency=medium
* debian/patches/lspci-Support-GEN4-speed-16GT-s.patch: Cherry-pick from
upstream to support PCI gen4 cards in lspci. Closes LP: #1665436.
-- Steve Langasek <[email protected]> Thu, 16 Feb 2017
14:22:34 -0800
** Changed in: pciutils (Ubuntu Yakkety)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1665436
Title:
lspci tool needs to be updated to support pci gen4 cards
Status in pciutils package in Ubuntu:
Fix Released
Status in pciutils source package in Xenial:
Fix Released
Status in pciutils source package in Yakkety:
Fix Released
Bug description:
[SRU Justification]
hardware enablement for next-gen hardware in a common hardware utility.
[Test case]
1. On a system with a Mellanox CX5 card, run: lspci -vv -s 0001:01:00.2 |
grep Speed
2. Verify that the output shows 'Speed unknown'.
3. Install pciutils from -proposed.
4. Run 'lspci -vv -s 0001:01:00.2 | grep Speed' again.
5. Verify that the output shows 'Speed 16GT/s'.
[Regression potential]
Minimal, and none on systems without the new hardware; this is a code change
to trivially extend switch/case statements with a new value.
---Problem Description---
This bugzilla is for tracking that the pciutils tool needs to be updated to
support pci gen4 cards. Mellanox CX5 card is a pci gen4 card and when I do the
following commands I get error. I do not see these errors with Mellanox CX4
which is pci gen3 card.
In a system, with Mellanox CX4 and CX5 IB with SRIOV:
lspci | grep Mell
0001:01:00.0 Infiniband controller: Mellanox Technologies MT28800 Family
[ConnectX-5 Ex]
0001:01:00.1 Infiniband controller: Mellanox Technologies MT28800 Family
[ConnectX-5 Ex]
0001:01:00.2 Infiniband controller: Mellanox Technologies MT28800 Family
[ConnectX-5 Virtual Function]
0002:01:00.0 Infiniband controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
0002:01:00.1 Infiniband controller: Mellanox Technologies MT27700 Family
[ConnectX-4]
0002:01:00.2 Infiniband controller: Mellanox Technologies MT27700 Family
[ConnectX-4 Virtual Function]
If I do this command with CX4 is ok
virsh nodedev-detach pci_0002_01_00_2
Device pci_0002_01_00_2 detached
but if I do this with CX5 it fails:
virsh nodedev-detach pci_0001_01_00_2
error: Failed to detach device pci_0001_01_00_2
error: malformed 'speed' attribute: (null)
This is what I see with CX5:
lspci -vv -s 0001:01:00.2 | grep Speed
LnkCap: Port #0, Speed unknown, Width x16, ASPM not supported, Exit Latency
L0s unlimited, L1 unlimited
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
and this is what I see for CX4
lspci -vv -s 0002:01:00.2 | grep Speed
LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM not supported, Exit Latency L0s
unlimited, L1 unlimited
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt-
ABWMgmt-
---Additional Hardware Info---
using Mellanox CX5 card that is pci gen4
lspci -vv -s 0001:01:00.0 | grep Speed
LnkCap: Port #0, Speed unknown, Width x16, ASPM not
supported, Exit Latency L0s unlimited, L1 unlimited
LnkSta: Speed 8GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
LnkCtl2: Target Link Speed: Unknown, EnterCompliance-
SpeedDis-
Machine Type = P8
---Steps to Reproduce---
just plug a pci gen4 card to the system and do this command
lspci -vv -s 0001:01:00.0 | grep Speed
LnkCap: Port #0, Speed unknown, Width x16, ASPM not
supported, Exit Latency L0s unlimited, L1 unlimited
LnkSta: Speed 8GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
LnkCtl2: Target Link Speed: Unknown, EnterCompliance-
SpeedDis-
Will see the speed unknown.
Userspace tool common name: pciutils
The patch is already in the pci utils tree:
commit 9628600bbbeffc4ec6dc48943ee091a5d3eca18b
Author: Gavin Shan <[email protected]>
Date: Wed Feb 15 10:53:45 2017 +1100
lspci: Support GEN4 speed (16GT/s)
This enables "lspci" to show GEN4 speed (16GT/s) properly according
to the contents in register PCI_EXP_LNKCAP, PCI_EXP_LNKSTA and
PCI_EXP_LNKCTL2.
IBM is asking for the patch to go into 17.04 as well s 16.04.3.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pciutils/+bug/1665436/+subscriptions
_______________________________________________
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : [email protected]
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help : https://help.launchpad.net/ListHelp
