Public bug reported:

[Impact]
Backport features in upstream netplan / netplan in artful to zesty, xenial.

[Test cases]

== Autopkgtests ==
Run autopkgtests, they should all pass.


== MTU settings ==
1) Set a MTU for a device managed by NetworkManager:

ethernet:
  eth0:
    renderer: NetworkManager
    mtu: 1400
    dhcp4: yes

2) Verify that the MTU is properly applied to the device.


== IPv6 method=ignore ==
1) Ensure that when no configuration is specified for an interface rendered by 
NetworkManager, method=ignore is set under [ipv6] in the NetworkManager 
configuration.


[Regression potential]
Failure to properly configure existing interfaces for MTU settings, IPv6 
settings would be regressions; for example, if existing network devices were to 
all get the same MTU, or the same MTU as another interface configured in 
netplan although the configuration is not set to apply to them (ie. the config 
bleeds to other devices); then this would be a regression. Any new failures in 
autopkgtests would also be regressions to be investigated as possibly caused by 
the update.

** Affects: nplan (Ubuntu)
     Importance: Undecided
         Status: Fix Released

** Affects: nplan (Ubuntu Xenial)
     Importance: High
     Assignee: Mathieu Trudel-Lapierre (cyphermox)
         Status: In Progress

** Affects: nplan (Ubuntu Zesty)
     Importance: High
     Assignee: Mathieu Trudel-Lapierre (cyphermox)
         Status: Triaged

** Also affects: nplan (Ubuntu Xenial)
   Importance: Undecided
       Status: New

** Also affects: nplan (Ubuntu Zesty)
   Importance: Undecided
       Status: New

** Changed in: nplan (Ubuntu)
       Status: New => Fix Released

** Changed in: nplan (Ubuntu Xenial)
       Status: New => In Progress

** Changed in: nplan (Ubuntu Xenial)
   Importance: Undecided => High

** Changed in: nplan (Ubuntu Zesty)
   Importance: Undecided => High

** Changed in: nplan (Ubuntu Zesty)
       Status: New => Triaged

** Changed in: nplan (Ubuntu Xenial)
     Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox)

** Changed in: nplan (Ubuntu Zesty)
     Assignee: (unassigned) => Mathieu Trudel-Lapierre (cyphermox)

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1713142

Title:
  Backport netplan 0.26

Status in nplan package in Ubuntu:
  Fix Released
Status in nplan source package in Xenial:
  In Progress
Status in nplan source package in Zesty:
  Triaged

Bug description:
  [Impact]
  Backport features in upstream netplan / netplan in artful to zesty, xenial.

  [Test cases]

  == Autopkgtests ==
  Run autopkgtests, they should all pass.

  
  == MTU settings ==
  1) Set a MTU for a device managed by NetworkManager:

  ethernet:
    eth0:
      renderer: NetworkManager
      mtu: 1400
      dhcp4: yes

  2) Verify that the MTU is properly applied to the device.

  
  == IPv6 method=ignore ==
  1) Ensure that when no configuration is specified for an interface rendered 
by NetworkManager, method=ignore is set under [ipv6] in the NetworkManager 
configuration.

  
  [Regression potential]
  Failure to properly configure existing interfaces for MTU settings, IPv6 
settings would be regressions; for example, if existing network devices were to 
all get the same MTU, or the same MTU as another interface configured in 
netplan although the configuration is not set to apply to them (ie. the config 
bleeds to other devices); then this would be a regression. Any new failures in 
autopkgtests would also be regressions to be investigated as possibly caused by 
the update.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/nplan/+bug/1713142/+subscriptions

_______________________________________________
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to     : [email protected]
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help   : https://help.launchpad.net/ListHelp

Reply via email to