This bug was fixed in the package linux - 4.10.0-38.42
---------------
linux (4.10.0-38.42) zesty; urgency=low
* linux: 4.10.0-38.42 -proposed tracker (LP: #1722330)
* Controller lockup detected on ProLiant DL380 Gen9 with P440 Controller
(LP: #1720359)
- scsi: hpsa: limit transfer length to 1MB
* [Dell Docking IE][0bda:8153] Realtek USB Ethernet leads to system hang
(LP: #1720977)
- r8152: fix the list rx_done may be used without initialization
* Touchpad not detected in Lenovo X1 Yoga / Yoga 720-15IKB (LP: #1700657)
- mfd: intel-lpss: Add missing PCI ID for Intel Sunrise Point LPSS devices
* Add installer support for Broadcom BCM573xx network drivers. (LP: #1720466)
- d-i: Add bnxt_en to nic-modules.
* CVE-2017-1000252
- KVM: VMX: Do not BUG() on out-of-bounds guest IRQ
* CVE-2017-10663
- f2fs: sanity check checkpoint segno and blkoff
* xfstest sanity checks on seek operations fails (LP: #1696049)
- xfs: fix off-by-one on max nr_pages in xfs_find_get_desired_pgoff()
* [P9, Power NV][ WSP][Ubuntu 16.04.03] : perf hw breakpoint command results
in call traces and system goes for reboot. (LP: #1706033)
- powerpc/64s: Handle data breakpoints in Radix mode
* 5U84 - ses driver isn't binding right - cannot blink lights on 1 of the 2
5u84 (LP: #1693369)
- scsi: ses: do not add a device to an enclosure if enclosure_add_links()
fails.
* Vlun resize request could fail with cxlflash driver (LP: #1713575)
- scsi: cxlflash: Fix vlun resize failure in the shrink path
* More migrations with constant load (LP: #1713576)
- sched/fair: Prefer sibiling only if local group is under-utilized
* New PMU fixes for marked events. (LP: #1716491)
- powerpc/perf: POWER9 PMU stops after idle workaround
* CVE-2017-14340
- xfs: XFS_IS_REALTIME_INODE() should be false if no rt device present
* [Zesty][Yakkety] rtl8192e bug fixes (LP: #1698470)
- staging: rtl8192e: rtl92e_fill_tx_desc fix write to mapped out memory.
- staging: rtl8192e: fix 2 byte alignment of register BSSIDR.
- staging: rtl8192e: rtl92e_get_eeprom_size Fix read size of EPROM_CMD.
- staging: rtl8192e: GetTs Fix invalid TID 7 warning.
* Stranded with ENODEV after mdadm --readonly (LP: #1706243)
- md: MD_CLOSING needs to be cleared after called md_set_readonly or
do_md_stop
* multipath -ll is not showing the disks which are actually multipath
(LP: #1718397)
- fs: aio: fix the increment of aio-nr and counting against aio-max-nr
* ETPS/2 Elantech Touchpad inconsistently detected (Gigabyte P57W laptop)
(LP: #1594214)
- Input: i8042 - add Gigabyte P57 to the keyboard reset table
* CVE-2017-10911
- xen-blkback: don't leak stack data via response ring
* CVE-2017-11176
- mqueue: fix a use-after-free in sys_mq_notify()
* implement 'complain mode' in seccomp for developer mode with snaps
(LP: #1567597)
- Revert "UBUNTU: SAUCE: seccomp: log actions even when audit is disabled"
- seccomp: Provide matching filter for introspection
- seccomp: Sysctl to display available actions
- seccomp: Operation for checking if an action is available
- seccomp: Sysctl to configure actions that are allowed to be logged
- seccomp: Selftest for detection of filter flag support
- seccomp: Action to log before allowing
* implement errno action logging in seccomp for strict mode with snaps
(LP: #1721676)
- Revert "UBUNTU: SAUCE: seccomp: log actions even when audit is disabled"
- seccomp: Provide matching filter for introspection
- seccomp: Sysctl to display available actions
- seccomp: Operation for checking if an action is available
- seccomp: Sysctl to configure actions that are allowed to be logged
- seccomp: Selftest for detection of filter flag support
- seccomp: Filter flag to log all actions except SECCOMP_RET_ALLOW
* Backport recent bbr bugfixes to 4.10 kernel (LP: #1708604)
- tcp_bbr: cut pacing rate only if filled pipe
- tcp_bbr: introduce bbr_bw_to_pacing_rate() helper
- tcp_bbr: introduce bbr_init_pacing_rate_from_rtt() helper
- tcp_bbr: remove sk_pacing_rate=0 transient during init
- tcp_bbr: init pacing rate on first RTT sample
* [SRU][Zesty] Fix lscpu segfault on ARM64 with SMBIOS v2.0 (LP: #1716483)
- arm64: kernel: restrict /dev/mem read() calls to linear region
-- Kleber Sacilotto de Souza <kleber.so...@canonical.com> Tue, 10 Oct
2017 13:49:34 +0200
** Changed in: linux (Ubuntu Zesty)
Status: Fix Committed => Fix Released
** CVE added: https://cve.mitre.org/cgi-
bin/cvename.cgi?name=2017-1000252
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-10663
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-10911
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-11176
** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2017-14340
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1693369
Title:
5U84 - ses driver isn't binding right - cannot blink lights on 1 of
the 2 5u84
Status in The Ubuntu-power-systems project:
Fix Committed
Status in linux package in Ubuntu:
Fix Released
Status in linux source package in Xenial:
Fix Committed
Status in linux source package in Zesty:
Fix Released
Status in linux source package in Artful:
Fix Released
Bug description:
== SRU Justification ==
This bug is resolved by commit 62e62ffd95539b9220894a7900a619e0f3ef4756.
Without this patch, the symlink in sysfs which binds a SAS device to an
enclosure
slot does not get created. This makes disk hotplug near impossible on large
JBOD disk drawers.
Commit 62e62ffd95 is also needed in Xenial. However, Xenial also needed some
prereq commits, so it's SRU will be sent separately.
Commit 62e62ffd95 is in mainline as of 4.13-rc1.
== Fix ==
commit 62e62ffd95539b9220894a7900a619e0f3ef4756
Author: Maurizio Lombardi <mlomb...@redhat.com>
Date: Tue Jun 27 11:53:27 2017 +0200
scsi: ses: do not add a device to an enclosure if
enclosure_add_links() fails.
== Regression Potential ==
This patch was also cc'd and applied to upstream stable, so there is
upstream confidence in it.
== Test Case ==
A test kernel was built with this patch and tested by the original bug
reporter.
The bug reporter states the test kernel resolved the bug.
This is a request to add the following upstream commit to both Ubuntu 16.04.1
and 16.04.2:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/drivers/scsi/ses.c?id=9373eba6cfae48911b977d14323032cd5d161aae
Without this patch, the symlink in sysfs which binds a SAS device to
an enclosure slot does not get created. This makes disk hotplug near
impossible on large JBOD disk drawers.
You should be able to do:
ls /sys/block/sdb/device/ | grep enclosure
and see something like:
enclosure_device:1
If you cd to this directory, you can then access the SES controls for
that slot to flash the LED to assist in locating the disk to replace a
failed disk.
Currently with 16.04.1 and 16.04.2, these symlinks are not getting
created.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu-power-systems/+bug/1693369/+subscriptions
_______________________________________________
Mailing list: https://launchpad.net/~group.of.nepali.translators
Post to : group.of.nepali.translators@lists.launchpad.net
Unsubscribe : https://launchpad.net/~group.of.nepali.translators
More help : https://help.launchpad.net/ListHelp
