I have an en0, en1, en2, en3, and en4. These are my (en1) USB Ethernet
adapter, (en3) iPhone USB tether, (en4) other iPhone USB tether
(wife's phone), and (en2) Bluetooth PAN (iPhone tether). ifconfig(8)
shows en0 and en2 working (with en2 down, since no bluetooth tether).
scutil(8) shows en0 and en2, again with en2 inactive. As I said, en0
is my AirPort.
Is there any more info you need?
Thanks,
JP
P.S. details:
$ echo list | scutil | grep -F 'Network/Interface/en'
subKey [7] = Setup:/Network/Interface/en0/AirPort
subKey [61] = State:/Network/Interface/en0/AirPort
subKey [62] = State:/Network/Interface/en0/IPv4
subKey [63] = State:/Network/Interface/en0/IPv6
subKey [64] = State:/Network/Interface/en0/Link
subKey [65] = State:/Network/Interface/en2/Link
$ ifconfig
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
inet 127.0.0.1 netmask 0xff000000
inet6 ::1 prefixlen 128
inet6 xxx prefixlen 128
gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
stf0: flags=0<> mtu 1280
en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
inet6 xxx%en0 prefixlen 64 scopeid 0x4
inet6 xxx prefixlen 64 autoconf
inet 10.0.1.2 netmask 0xffffff00 broadcast 10.0.1.255
ether xxx
media: autoselect status: active
supported media: autoselect
en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
ether xxx
media: autoselect status: inactive
supported media: none autoselect 10baseT/UTP <half-duplex>
On Aug 14, 10:18 am, Christopher Forsythe <[email protected]> wrote:
> Can you do an ifconfig and see if you have an en1 and an en0 anyhow?
>
> It's most likely mba specific, and this is where you report issues. :)
>
> Chris
>
>
>
> On Fri, Aug 14, 2009 at 8:34 AM, gaelicWizard <[email protected]> wrote:
>
> > I use a MacBook Air. I have no ethernet port. HardwareGrowler gives me
> > updates to en0 (when I connect to an AirPort network) as though I had
> > attached an ethernet plug. It does not tell me what network, as it
> > would for en1, and it tries to tell me the speed (gigabit, 10, 100)
> > (it says "unknown" for the speed).
>
> > trac.growl.info is busted. growl.info/documentation/developer is way
> > out of date (wrong theme, info about 1.1.3, &c.).
>
> > Where do I file a bug? How do I fix this? Is this a MacBook Air
> > specific issue? What do I do now?
>
> > Thanks for any help!
>
> > JP
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups
"Growl Discuss" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/growldiscuss?hl=en
-~----------~----~----~----~------~----~------~--~---
