So I've noticed this same beachball lockup on activating the laptop. It is plugged in all night but power settings are configured to not actually sleep the system nor the hard drives. Only turn off the display after 30 mins. When I log in, Growl process has hung again. Nothing in the console log until I kill the process.
On Tue, Dec 13, 2011 at 8:25 PM, Peter Lewis <[email protected]> wrote: > I have the same problem. The hang is causing other apps which use > Growl to not respond and beach ball until I kill Growl > > Here's an excerpt from my Console log regarding it: > > 14/12/2011 03:18:03.309 com.growl.hardwaregrowler.GNTPClientService: > Got disconnected: Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read > operation timed out" UserInfo=0x4004156e0 {NSLocalizedDescription=Read > operation timed out} > 14/12/2011 03:18:03.309 com.growl.hardwaregrowler.GNTPClientService: > 2011-12-14 03:18:03.307 > com.growl.hardwaregrowler.GNTPClientService[46432:1e03] Got > disconnected: Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read > operation timed out" UserInfo=0x4004156e0 {NSLocalizedDescription=Read > operation timed out} > 14/12/2011 03:18:03.309 com.growl.hardwaregrowler.GNTPClientService: > <GrowlGNTPNotificationAttempt: 0x40040c340> failed because Error > Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > UserInfo=0x4004156e0 {NSLocalizedDescription=Read operation timed out} > 14/12/2011 03:18:03.309 com.growl.hardwaregrowler.GNTPClientService: > 2011-12-14 03:18:03.309 > com.growl.hardwaregrowler.GNTPClientService[46432:1e03] > <GrowlGNTPNotificationAttempt: 0x40040c340> failed because Error > Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > UserInfo=0x4004156e0 {NSLocalizedDescription=Read operation timed out} > 14/12/2011 03:18:03.310 HardwareGrowler: Failed with code 0, "(null)" > 14/12/2011 03:18:03.468 com.growl.hardwaregrowler.GNTPClientService: > Got disconnected: Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read > operation timed out" UserInfo=0x40010faa0 {NSLocalizedDescription=Read > operation timed out} > 14/12/2011 03:18:03.468 com.growl.hardwaregrowler.GNTPClientService: > 2011-12-14 03:18:03.467 > com.growl.hardwaregrowler.GNTPClientService[46432:1e03] Got > disconnected: Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read > operation timed out" UserInfo=0x40010faa0 {NSLocalizedDescription=Read > operation timed out} > 14/12/2011 03:18:03.468 com.growl.hardwaregrowler.GNTPClientService: > <GrowlGNTPNotificationAttempt: 0x40040ea40> failed because Error > Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > UserInfo=0x40010faa0 {NSLocalizedDescription=Read operation timed out} > 14/12/2011 03:18:03.469 com.growl.hardwaregrowler.GNTPClientService: > 2011-12-14 03:18:03.468 > com.growl.hardwaregrowler.GNTPClientService[46432:1e03] > <GrowlGNTPNotificationAttempt: 0x40040ea40> failed because Error > Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > UserInfo=0x40010faa0 {NSLocalizedDescription=Read operation timed out} > 14/12/2011 03:18:03.469 HardwareGrowler: Failed with code 0, "(null)" > > > On Dec 13, 2:24 am, "J.Bingham" <[email protected]> wrote: > > I'm experiencing a beachball spin of Growl at bootup when it receives a > > notification from HardwareGrowler. It does not do it if I quit/relaunch > > Growl nor if I logout/login. > > > > I am using Growl 1.3.2 and HardwareGrowler 1.3.1. I was using an older > > version of HG (1.2.?) but decided to pay for the 1.3.1 upgrade in hopes > > that it was just an incompatibility with the old version. It wasn't :( > > > > It does not recover if I kill the HG process, only if I kill the Growl > > process. Apps that register with Growl (like HG and Adium) still respond > > like normal. > > > > I'm not using any custom plugins. I removed the new 1.3.2 plugins > > WhiteBoard and Darkroom based on another support > > thread< > http://groups.google.com/group/growldiscuss/browse_thread/thread/b7bd.. > .>but > > that didn't help either. > > > > I have HG configured with default settings, but using the Smoke theme (my > > global default is Music Video). When it locks up, it is showing the > > 'Switched to A/C Power' notification as it has detected this during boot. > > If I set it to use the default theme, it didn't even show the Music Video > > popup but just beachballed. > > > > Below are the entries from the console log regarding Growl. > > I also have the .spin diagnostic report file after killing the Growl > > process if you need it. > > > > --- SNIP from console log --- > > > > 12/12/11 7:12:28.457 PM HardwareGrowler: Application Launched > > 12/12/11 7:12:29.001 PM Growl: <GCDAsyncSocket: 0x7f9d12302d70> now > > accepting ((null)) > > 12/12/11 7:12:29.002 PM Growl: publishing > > 12/12/11 7:12:29.642 PM Growl: Setup timer, this should only happen once > > 12/12/11 7:12:29.642 PM Growl: Next image check no earlier than 24 hours > > from 2011-12-12 06:59:00 +0000 > > 12/12/11 7:12:35.357 PM com.growl.hardwaregrowler.GNTPClientService: Got > > disconnected: Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read > operation > > timed out" UserInfo=0x40041aa00 {NSLocalizedDescription=Read operation > > timed out} > > 12/12/11 7:12:35.357 PM com.growl.hardwaregrowler.GNTPClientService: > > 2011-12-12 19:12:35.355 > > com.growl.hardwaregrowler.GNTPClientService[462:10b] Got disconnected: > > Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > > UserInfo=0x40041aa00 {NSLocalizedDescription=Read operation timed out} > > 12/12/11 7:12:35.358 PM com.growl.hardwaregrowler.GNTPClientService: > > <GrowlGNTPRegistrationAttempt: 0x40040db60> failed because Error > > Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > > UserInfo=0x40041aa00 {NSLocalizedDescription=Read operation timed out} > > 12/12/11 7:12:35.358 PM com.growl.hardwaregrowler.GNTPClientService: > > 2011-12-12 19:12:35.357 > > com.growl.hardwaregrowler.GNTPClientService[462:10b] > > <GrowlGNTPRegistrationAttempt: 0x40040db60> failed because Error > > Domain=GCDAsyncSocketErrorDomain Code=4 "Read operation timed out" > > UserInfo=0x40041aa00 {NSLocalizedDescription=Read operation timed out} > > 12/12/11 7:12:35.359 PM HardwareGrowler: Failed with code 0, "(null)" > > 12/12/11 7:12:48.413 PM Adium: <GrowlGNTPRegistrationAttempt: > 0x10335af30> > > failed because Error Domain=GCDAsyncSocketErrorDomain Code=4 "Read > > operation timed out" UserInfo=0x1026bca90 {NSLocalizedDescription=Read > > operation timed out} > > > > --- SNIP from console log --- > > -- > You received this message because you are subscribed to the Google Groups > "Growl Discuss" group. > To post to this group, send email to [email protected]. > To unsubscribe from this group, send email to > [email protected]. > For more options, visit this group at > http://groups.google.com/group/growldiscuss?hl=en. > > -- You received this message because you are subscribed to the Google Groups "Growl Discuss" group. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/growldiscuss?hl=en.
