that all looks ok, is anything logged to console.app when you perform the actions you feel should be presenting you with notifications? (the reason we're stepping through these hoops is because I'm running the app store build and i get notifications when i wake my computer from sleep as it reestablishes its wifi connection, if i turn wifi off/on, if i change locations in the network prefpane, etc)
so any information you can think of that might make your configuration different would be helpful. it might also be helpful if you could detail step by step what you're doing when it should be firing a notification, maybe something in your steps will hint at where the problem lies. -rudy On Friday, November 23, 2012 1:52:02 PM UTC-5, Mark Foster wrote: > > Daniel, Rudy, > > "Show Connected Devices at Launch" is off. Turning it on and relaunching > HWG does show a whole bunch of alerts, including one for the IP address. > Leaving it on has no effect on the lack of notifications when switching > networks, connecting or disconnecting. > > The Network Monitor is enabled in HWG preferences. The only one disabled > is the keyboard monitor. > All notification preferences are set to their default values except for > the display style which is "Bubbles". Changing this to a different style > does not help. > > As requested, output of ifconfig -a (hw addrs anonymised, IP addrs NAT > anyway): > > pointyheed:~ markf$ ifconfig -a > lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 > options=3<RXCSUM,TXCSUM> > inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 > inet 127.0.0.1 netmask 0xff000000 > inet6 ::1 prefixlen 128 > gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 > stf0: flags=0<> mtu 1280 > en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > options=2b<RXCSUM,TXCSUM,VLAN_HWTAGGING,TSO4> > ether 00:1b:xx:xx:xx:xx > media: autoselect > status: inactive > fw0: flags=8822<BROADCAST,SMART,SIMPLEX,MULTICAST> mtu 2030 > lladdr 00:19:e3:ff:xx:xx:xx:xx > media: autoselect <full-duplex> > status: inactive > en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 > ether 00:17:xx:xx:xx:xx > inet6 fe80::217:xxxx:xxxx:xxxx%en1 prefixlen 64 scopeid 0x6 > inet 172.16.0.4 netmask 0xffffff00 broadcast 172.16.0.255 > media: autoselect > status: active > > As mentioned: this all worked perfectly in the previous version. > -- You received this message because you are subscribed to the Google Groups "Growl Discuss" group. To view this discussion on the web visit https://groups.google.com/d/msg/growldiscuss/-/FZ6sXbLvDGoJ. To post to this group, send email to [email protected]. To unsubscribe from this group, send email to [email protected]. For more options, visit this group at http://groups.google.com/group/growldiscuss?hl=en.
