Robert Millan <[EMAIL PROTECTED]> writes:
> On Mon, Jan 28, 2008 at 07:32:33PM +0100, Marco Gerards wrote:
>> > --- qemu-0.9.0+20070816/hw/pc.c~ 2007-06-06 18:26:13.000000000 +0200
>> > +++ qemu-0.9.0+20070816/hw/pc.c 2008-01-28 18:25:00.000000000 +0100
>> > @@ -676,6 +676,8 @@
>> > qemu_irq *cpu_irq;
>> > qemu_irq *i8259;
>> >
>> > + pci_enabled = 1;
>> > +
>> > linux_boot = (kernel_filename != NULL);
>> >
>> > /* init CPUs */
>>
>> The problem isn't that PCI isn't enabled. The problem is that IDE
>> devices are in legacy mode...
>>
>> So you do see the IDE interface using lspci. One bit can be used to
>> check if the device is in legacy mode or not. If it indicates legacy
>> mode, you have to use some fixed ports that are already present in
>> ata.c. Otherwise, you can query the port ranges from the PCI device.
>> Qemu only supports the latter mode, as it seems.
>
> You're right. Even when PCI is enabled, you still get the same, although it
> doesn't look like it at first glance:
>
> if (pci_enabled) {
> pci_piix3_ide_init(pci_bus, bs_table, piix3_devfn + 1, i8259);
> } else {
> for(i = 0; i < 2; i++) {
> isa_ide_init(ide_iobase[i], ide_iobase2[i], i8259[ide_irq[i]],
> bs_table[2 * i], bs_table[2 * i + 1]);
> }
> }
>
> I think what you want is to change the hardcoded port numbers in
> hw/ide.c:pci_piix3_ide_init():
>
> ide_init_ioport(&d->ide_if[0], 0x1f0, 0x3f6);
> ide_init_ioport(&d->ide_if[2], 0x170, 0x376);
>
> could that be it?
Perhaps... But it is still in legacy mode I guess... ;-)
--
Marco
_______________________________________________
Grub-devel mailing list
Grub-devel@gnu.org
http://lists.gnu.org/mailman/listinfo/grub-devel
