On Mon, Feb 19, 2018 at 03:26:35PM +0100, C. Masloch wrote: > The definition of bpb's num_total_sectors_16 and num_total_sectors_32 > is that either the 16-bit field is non-zero and is used (in which case > eg mkfs.fat sets the 32-bit field to zero), or it is zero and the > 32-bit field is used. Therefore, a BPB is invalid only if *both* > fields are zero; having one field as zero and the other as non-zero is > the case to be expected. (Indeed, according to Microsoft's specification > one of the fields *must* be zero, and the other non-zero.) > > This affects all users of grub_chainloader_patch_bpb which are in > chainloader.c, freedos.c, and ntldr.c > > Some descriptions of the semantics of these two fields: > > https://www.win.tue.nl/~aeb/linux/fs/fat/fat-1.html > > > The old 2-byte fields "total number of sectors" and "number of > > sectors per FAT" are now zero; this information is now found in > > the new 4-byte fields. > > (Here given in the FAT32 EBPB section but the total sectors 16/32 bit > fields semantic is true of FAT12 and FAT16 too.) > > https://wiki.osdev.org/FAT#BPB_.28BIOS_Parameter_Block.29 > > > 19 | 2 | The total sectors in the logical volume. If this value is 0, > > it means there are more than 65535 sectors in the volume, and the actual > > count is stored in "Large Sectors (bytes 32-35). > > > 32 | 4 | Large amount of sector on media. This field is set if there > > are more than 65535 sectors in the volume. > > (Doesn't specify what the "large" field is set to when unused, but as > mentioned mkfs.fat sets it to zero then.) > > https://technet.microsoft.com/en-us/library/cc976796.aspx > > > 0x13 | WORD | 0x0000 | > > Small Sectors . The number of sectors on the volume represented in 16 > > bits (< 65,536). For volumes larger than 65,536 sectors, this field > > has a value of zero and the Large Sectors field is used instead. > > > 0x20 | DWORD | 0x01F03E00 | > > Large Sectors . If the value of the Small Sectors field is zero, this > > field contains the total number of sectors in the FAT16 volume. If the > > value of the Small Sectors field is not zero, the value of this field > > is zero. > > https://staff.washington.edu/dittrich/misc/fatgen103.pdf page 10 > > > BPB_TotSec16 | 19 | 2 | > > This field is the old 16-bit total count of sectors on the volume. > > This count includes the count of all sectors in all four regions of the > > volume. This field can be 0; if it is 0, then BPB_TotSec32 must be > > non-zero. For FAT32 volumes, this field must be 0. For FAT12 and > > FAT16 volumes, this field contains the sector count, and > > BPB_TotSec32 is 0 if the total sector count ???fits??? (is less than > > 0x10000). > > > BPB_TotSec32 | 32 | 4 | > > This field is the new 32-bit total count of sectors on the volume. > > This count includes the count of all sectors in all four regions of the > > volume. This field can be 0; if it is 0, then BPB_TotSec16 must be > > non-zero. For FAT32 volumes, this field must be non-zero. For > > FAT12/FAT16 volumes, this field contains the sector count if > > BPB_TotSec16 is 0 (count is greater than or equal to 0x10000). > > (This specifies that an unused BPB_TotSec32 field is set to zero.) > > Tested with lDebug booted in qemu via grub2's > FreeDOS direct loading support, refer to > https://bitbucket.org/ecm/ldosboot + https://bitbucket.org/ecm/ldebug > > Signed-off-by: C. Masloch <pus...@38.de>
I will add to the commit message that by the way you are fixing comments in include/grub/fat.h. Otherwise Reviewed-by: Daniel Kiper <daniel.ki...@oracle.com> Daniel _______________________________________________ Grub-devel mailing list Grub-devel@gnu.org https://lists.gnu.org/mailman/listinfo/grub-devel