Thanks for the info. I will prob'l order the adapters from Buschur Racing then. Lovely CNC machined aluminium items anodized red. Attached pix..
cheers, LL Saw --- Jason Rodgers <[EMAIL PROTECTED]> wrote: > GSR fuel rail inlet bolts to the vr4 rail no > issues... > > Bolt spacing on the GSR reg is closer together than > the vr4 reg... Just > elongate the two bolt holes... The oring dimension > is the same... > > > > >From: Andrew Saw <[EMAIL PROTECTED]> > >Reply-To: [email protected] > >To: [email protected] > >Subject: RE: [GSR_EVO] W.T.B SX fuel regulator 4G63 > >Date: Mon, 10 Jan 2005 07:41:36 +0000 (GMT) > > > >Are you positively 100% sure? No one can confirm on > >this and I'm really worried as these fittings are > not > >cheap!!! > > > >cheers, > >LL Saw > > > > --- Jason Rodgers <[EMAIL PROTECTED]> > >wrote: > > > The fittings for the 4g63 and the 4g93 fuel > rails > > > are the same... > > > > > > BUT, the fuel regs between the two are not > > > interchangable, as the 2 bolt > > > flange on the GSR rail is different, but nothing > a > > > little drilling cant fix! > > > > > > > > > > > > >From: Andrew Saw <[EMAIL PROTECTED]> > > > >Reply-To: [email protected] > > > >To: [email protected] > > > >Subject: RE: [GSR_EVO] W.T.B SX fuel regulator > 4G63 > > > >Date: Mon, 10 Jan 2005 05:42:03 +0000 (GMT) > > > > > > > >Is this for the 4G93? I understand the one > meant > > > for > > > >the 4G63 will not fit as the internal pipe > cinlet > > > (the > > > >one where the rubber O ring goes into) is a > larger > > > >diameter than the 4G63 ones.. > > > > > > > >cheers, > > > >LL Saw > > > > > > > > --- Jason Rodgers > <[EMAIL PROTECTED]> > > > >wrote: > > > > > I'll send you a link tonight... > > > > > > > > > > I got mine from a place which made a high > flow > > > fuel > > > > > system for the DSM's... > > > > > Im pretty sure Road/Race Engineering have > them > > > too.. > > > > > > > > > > Do a google search on "AN fuel rail adapter > DSM" > > > > > > > > > > Cost me about $50 AUS to have them > delivered.... > > > > > > > > > > > > > > > > > > > > >From: Andrew Saw <[EMAIL PROTECTED]> > > > > > >Reply-To: [email protected] > > > > > >To: [email protected] > > > > > >Subject: RE: [GSR_EVO] W.T.B SX fuel > regulator > > > 4G63 > > > > > >Date: Mon, 10 Jan 2005 00:21:01 +0000 (GMT) > > > > > > > > > > > >Does anyone know where I can get the fuel > rail > > > > > adapter > > > > > >to convert my fuel supply line to AN? I > have > > > > > already > > > > > >purchased the relevant Goodridge hoses with > > > Earls > > > > > >adapter for the fuel filter but am having > > > trouble > > > > > with > > > > > >the 4G93's fuel rail.. > > > > > > > > > > > >cheers, > > > > > >LL Saw > > > > > > > > > > > > --- Jason Rodgers > > > <[EMAIL PROTECTED]> > > > > > >wrote: > > > > > > > There are two different types of SX reg. > > > > > > > > > > > > > > I would recommend you get the one with > the > > > -10 > > > > > inlet > > > > > > > ports, -6 outlet and it > > > > > > > also has a 1/8NPT port for a gauge. > > > > > > > > > > > > > > You will need an adapter to suit the > fuel > > > rail. > > > > > The > > > > > > > best adapters are > > > > > > > available from the states for about > $25ea, > > > which > > > > > > > bolt into the factory rail > > > > > > > and give you a -6AN outlet. > > > > > > > > > > > > > > Then you just need to get hold of -10AN > > > plug, a > > > > > -10 > > > > > > > to -6 adapter (O-ring > > > > > > > seal on the -10 side), and a -6 to -4 > > > adapter > > > > > > > (o-ring seal -6 side).... > > > > > > > These adapter are available through > Earls > > > and > > > > > > > speedflow. > > > > > > > > > > > > > > The regs are about $350 Retail from > > > memory... > > > > > Then > > > > > > > buy the adapter fittings > > > > > > > for about $70... > > > > > > > Get your fuel rail adapter $25.. then a > > > short > > > > > length > > > > > > > of -6 pushlock hose > > > > > > > with -6 hose ends and your done! > > > > > > > > > > > > > > > > > > > > > If you are after a cheaper solution, go > for > > > a > > > > > sard > > > > > > > fuel reg.. They can be > > > > > > > had for around the $250 mark.. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >From: "oscar2002jet" > > > > > <[EMAIL PROTECTED]> > > > > > > > >Reply-To: [email protected] > > > > > > > >To: [email protected] > > > > > > > >Subject: [GSR_EVO] W.T.B SX fuel > regulator > > > > > 4G63 > > > > > > > >Date: Sat, 08 Jan 2005 03:42:37 -0000 > > > > > > > > > > > > > > > > > > > > > > > >Im after a sx regulator,they are meant > to > > > be > > > > > the > > > > > > > best,How much are > > > > > > > >they worth? Does it fit straight on > motor? > > > IM > > > > > in > > > > > > > melbourne!!!!!! > > > > > > > >Is there all different types or all sx > > > > > regulators > > > > > > > are the same. > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >________________________________________________________________________ > > > > > >Yahoo! Messenger - Communicate > > > instantly..."Ping" > > > > > >your friends today! Download Messenger Now > > > > > > > > > >http://uk.messenger.yahoo.com/download/index.html > > > > > > > > > > > > > > > > > > > > > > > > > > > ________________________________________________________________________ Yahoo! Messenger - Communicate instantly..."Ping" your friends today! Download Messenger Now http://uk.messenger.yahoo.com/download/index.html ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/_nTolB/TM --------------------------------------------------------------------~-> Community email addresses: Post message: [email protected] Unsubscribe: [EMAIL PROTECTED] List Owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/gsr_evo/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
<<inline: fuelfittings.jpg>>
