You'd need to check whether its the bearings in the pulley stopping the pulley from turning or the belt slipping on the pulley (or a combination of both).
While you're down there I'd also recommend checking the condition of the harmonic balancer also.. Daniel. --- In [email protected], "John Germanos" <[EMAIL PROTECTED]> wrote: > hello > > a new problem started on the weekend... > > With the air con on, i get this ticking sound coming from the air con > compressor. > I jacked up the car and noticed that the pulley at the end of the > compressor would spin like normal then stop and then start spinning > again. > > This only happens sometimes, i spoke to my mechanic and he said it could > be the bearings inside thepulley but isnt sure till he takes it off and > inspects.. > > any ideas ? > > thanks > > John > Mr Gsr ------------------------ Yahoo! Groups Sponsor --------------------~--> Help save the life of a child. Support St. Jude Children's Research Hospital's 'Thanks & Giving.' http://us.click.yahoo.com/6iY7fA/5WnJAA/Y3ZIAA/_nTolB/TM --------------------------------------------------------------------~-> Community email addresses: Post message: [email protected] Unsubscribe: [EMAIL PROTECTED] List Owner: [EMAIL PROTECTED] Yahoo! Groups Links <*> To visit your group on the web, go to: http://groups.yahoo.com/group/gsr_evo/ <*> To unsubscribe from this group, send an email to: [EMAIL PROTECTED] <*> Your use of Yahoo! Groups is subject to: http://docs.yahoo.com/info/terms/
