For anyone else doing the changeover to Brembos for a CC GSR. DBA 
will do a set of undrilled 320mm EVO rotors. The code number is 
#4418 -1 x USL, 1 x USR. ( USL - Undrilled Slotted Left, USR - 
Undrilled Slotted Right ). These are DBA Sport 4000 rotors. They 
don't supply direct but you can go through Repco, Autobarn, etc. You 
will probably have to order them. Im not sure about brackets and 
spacers at this point. I will probably make them myself if required..


--- In [email protected], "Mikey" <[EMAIL PROTECTED]> wrote:
>
> Im talking about the hight of the caliper, not the overall diameter 
of the caliper/rotor combination. you may need to use a spacer 
between the rim and rotor to clear the caliper.
> 
> or go for a 2 piece rotor, witha custom hat that includes the 
spacer.. thats what I have done.
> 
> 
> Mikey
> www.v6lancer.com
>   ----- Original Message ----- 
>   From: markverdon 
>   To: [email protected] 
>   Sent: Wednesday, October 25, 2006 3:15 PM
>   Subject: [GSR_EVO] Re: Brembos on CC GSR..
> 
> 
>   --- In [email protected], "Mikey" <mikeyfc@> wrote:
>   >
>   They should fit nicely under my 17" rims.. 
> 
>   > just redrill the rotors. good luck fitting the calipers under 
your 
>   rims though :)
>   > 
>   > 
>   > Mikey
>   > www.v6lancer.com
>   > ----- Original Message ----- 
>   > From: markverdon 
>   > To: [email protected] 
>   > Sent: Tuesday, October 24, 2006 11:04 PM
>   > Subject: [GSR_EVO] Brembos on CC GSR..
>   > 
>   > 
>   > I bought a set of Evo 7 Brembos and want to put them on my GSR. 
>   Has 
>   > anybody done the conversion and where did you get the 320mm 
>   rotors in 4 
>   > x 114.3.
>   > Thanx Mark
>   >
>





Community email addresses:
  Post message: [email protected]
  Unsubscribe:  [EMAIL PROTECTED]
  List Owner:   [EMAIL PROTECTED]
 
Yahoo! Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/gsr_evo/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/gsr_evo/join
    (Yahoo! ID required)

<*> To change settings via email:
    mailto:[EMAIL PROTECTED] 
    mailto:[EMAIL PROTECTED]

<*> To unsubscribe from this group, send an email to:
    [EMAIL PROTECTED]

<*> Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 

Reply via email to