please check queue signals "underrun" "overrun" ....
Zhao Liang
________________________________
From: Shenhong Wang [mailto:[EMAIL PROTECTED]
Sent: Thursday, June 19, 2008 9:47 AM
To: Zhao Bin-E6223C; Zhao Liang-E3423C;
gstreamer-embedded@lists.sourceforge.net
Subject: RE: [gst-embedded] Question on gst_plugin alsasink
Hi, Brad or Zhao Liang:
Is it possible for you to publish an example - how to post a message to
bus and pause/play pipeline? thanks a lot!
Best Regards!
Shenhong
________________________________
Subject: RE: [gst-embedded] Question on gst_plugin alsasink
Date: Wed, 18 Jun 2008 17:08:09 +0800
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED];
gstreamer-embedded@lists.sourceforge.net
I think it is due to gstbaseaudiosink/gstaudiosink, it will drop
the packets by gstringbuffer when read rate is bigger than write rate in
ringbuffer, please see gstringbuffer.c gst_ring_buffer_commit_full ().
Please check code in gstbaseaudiosink.c and gstaudiosink.c
i remember the sig_write is lower than sig_done,sink will drop
the buffer.
________________________________
From: Shenhong Wang [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2008 5:05 PM
To: Zhao Bin-E6223C; Zhao Liang-E3423C;
gstreamer-embedded@lists.sourceforge.net
Subject: RE: [gst-embedded] Question on gst_plugin alsasink
Thanks! Brad.
However I use two queues for audio and video separately but one
pipeline. So it would be impossible for me to pause the pipeline?
because the application can play video very well even the audio is
blocked.
Why the alsasink will drop all packets(frames) after a break or
so? thanks again
Shenhong
________________________________
Subject: RE: [gst-embedded] Question on gst_plugin
alsasink
Date: Wed, 18 Jun 2008 16:55:38 +0800
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]; [EMAIL PROTECTED];
gstreamer-embedded@lists.sourceforge.net
yes, you can refernce how to use queue. you can set
water mark in queue.And then post message to bus if lower than mater
mark. in your main app you can recieve the message to pause the
pipeline.
if higher water mark, you can use the same mechanism.
________________________________
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Zhao Liang-E3423C
Sent: Wednesday, June 18, 2008 4:49 PM
To: Shenhong Wang;
gstreamer-embedded@lists.sourceforge.net
Subject: Re: [gst-embedded] Question on gst_plugin
alsasink
Hi shenhong,
A simply solution you can try.
Put a queue before alsasink, when queue is dry, pause
pipeline, and restart pipeline when queue bufferred enough data.
Best Regards
Zhao Liang
________________________________
From: Shenhong Wang [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 18, 2008 4:44 PM
To: Zhao Liang-E3423C;
gstreamer-embedded@lists.sourceforge.net
Subject: RE: [gst-embedded] Question on gst_plugin
alsasink
Hi, Zhao Liang:
Generally, the aacdec &alsasink will not play out any
audio frames(packets) after its source element has a break to send audio
frames (packets) to them. It looks the alsasink drops all
frames(packets) from the break. The break is needed because we have more
video frames and sometime the wireless signal is not good.
It looks the aacdec is slower than the expectation from
alsasink.If so, how to fix the issue? thanks!
best Regards!
Shenhong
________________________________
Subject: RE: [gst-embedded] Question on
gst_plugin alsasink
Date: Wed, 18 Jun 2008 14:29:27 +0800
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED];
gstreamer-embedded@lists.sourceforge.net
Hi Shenhong,
Your issue is very similar with the issue I even
met. I think it is due to gstbaseaudiosink/gstaudiosink, it will drop
the packets by gstringbuffer when read rate is bigger than write rate in
ringbuffer, please see gstringbuffer.c gst_ring_buffer_commit_full ().
For the rootcause, I think maybe the alsasink
audiodevice buffer is too big or your aac decoder is too slow.
Best Regards
Zhao Liang
________________________________
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Shenhong Wang
Sent: Wednesday, June 18, 2008 2:21 PM
To: gstreamer-embedded@lists.sourceforge.net
Subject: [gst-embedded] Question on gst_plugin
alsasink
Dear all,
Now we are using alsasink to play audio on
Marvell PXA310 board. The audio is aac format. The audio frames(packets)
are frequently sent to the aac decoder & alsasink to play out.
Unfortunately only the begining frames can be played out and then
nothing is played out.
If we save those audio frames into a file, the
aac decoder&alsasink can be successfully played out. It means the audio
frames are ok.
Could anyone tell me what's the difference for
alsasink to process audio packets and files? How to fix the above issue?
thank you very much!
Best Regards!
Shenhong WANG
________________________________
Connect to the next generation of MSN Messenger
Get it now!
<http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&sou
rce=wlmailtagline>
________________________________
Connect to the next generation of MSN Messenger Get it
now!
<http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&sou
rce=wlmailtagline>
________________________________
Connect to the next generation of MSN Messenger Get it now!
<http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&sou
rce=wlmailtagline>
________________________________
Get news, entertainment and everything you care about at Live.com. Check
it out! <http://www.live.com/getstarted.aspx>
-------------------------------------------------------------------------
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
_______________________________________________
Gstreamer-embedded mailing list
Gstreamer-embedded@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gstreamer-embedded
