On Wed, 2008-09-24 at 15:53 -0400, Zmedia wrote: > Hi, > > I have 2 Freescale iMX27 ADS evaluation boards, and trying to stream > the compressed video from one board to the other over Ethernet. > Following are the commands I used, but I don't see any videos from the > receiving board display: >
Hi, To debug, start slowly, adding elements as you go. Like try: gst-launch-0.10 -v mfw_v4lsrc ! fakesink And see if data is captured and see what format etc.. You'll see messages each time a buffer is received in fakesink. Then add the encoder gst-launch-0.10 -v mfw_v4lsrc ! mfw_vpuencoder width=176 height=144 codec-type=std_h263 ! fakesink And so on. If you can establish that data is flowing to udpsink you might want to check with wireshark if stuff goes over the network. Then on the receiver you can start with gst-launch -v udpsrc .. ! fakesink And slowly build the complete pipelines. This should give you an idea when things stop working. Wim > > > > --------------------------------------------------------------------------------------------------------------------------------------- > > Board A: > > gst-launch-0.10 -v mfw_v4lsrc ! mfw_vpuencoder width=176 height=144 > codec-type=std_h263 ! rtph263ppay ! udpsink host=10.29.244.26 > port=5434 > > > > Board B: > > gst-launch --gst-debug-level=2 -v udpsrc port=5434 caps = > "application/x-rtp, media=(string)video, payload=(int)96, > clock-rate=(int)90000, encoding-name=(string)H263-1998, > ssrc=(guint)1920285880, clock-base=(guint)3978748897, > seqnum-base=(guint)10249" ! rtph263pdepay ! mfw_vpudecoder > codec-type=std_h263 ! mfw_v4lsink > > > > --------------------------------------------------------------------------------------------------------------------------------------- > > Board A: > > gst-launch -v filesrc location= kuuba_maisema_25fps_qcif.yuv > blocksize=38016 ! mfw_vpuencoder width=176 height=144 framerate=25 > codec-type=std_mpeg4 ! rtpmp4vpay ! udpsink host=10.29.244.26 > port=5434 > > > > Board B: > > gst-launch udpsrc port=5434 caps = "application/x-rtp, > media=(string)video, payload=(int)96, clock-rate=(int)90000, > encoding-name=(string)MP4V-ES, ssrc=(guint)2934921665, > clock-base=(guint)1608131808, seqnum-base=(guint)10897, > profile-level-id=(string)2, > config=(string)000001b002000001b59113000001000000012000c488800f50584121443f" > ! rtpmp4vdepay ! mfw_vpudecoder codec-type=std_mpeg4 ! mfw_v4lsink > > --------------------------------------------------------------------------------------------------------------------------------------- > > Anyone has any ideas. > > Thanks, > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's challenge > Build the coolest Linux based applications with Moblin SDK & win great prizes > Grand prize is a trip for two to an Open Source event anywhere in the world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ Gstreamer-embedded mailing > list Gstreamer-embedded@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/gstreamer-embedded ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Gstreamer-embedded mailing list Gstreamer-embedded@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/gstreamer-embedded
