you may refer gst-openmax, which is using Openmax to do tasks like you
mentioned.
sourcecode is under http://gstreamer.freedesktop.org/src/gst-openmax/
Zhao Liang
________________________________
From: Raghavendra [mailto:raghavend...@lge.com]
Sent: Thursday, January 22, 2009 11:57 AM
To: gstreamer-embedded@lists.sourceforge.net
Subject: [gst-embedded] FW: GStreamer Porting
Hi All,
Respond me regarding the below mentioned issue...
Thank you,
Raghu
________________________________
From: Raghavendra [mailto:raghavend...@lge.com]
Sent: Wednesday, January 21, 2009 10:05 AM
To: 'gstreamer-embedded@lists.sourceforge.net'
Subject: GStreamer Porting
Hi all,
I am having some porting doubt. Please help me.
In porting GStreamer on any dual processor board (MIPS and DSP),
GStreamer will sit on MIPS and my codecs will be there in Flash. When I
say create plug-in/element for that codec, codec should be loaded to DSP
processor from Flash (please make me correct if I am wrong). Now my
doubt is how GStreamer will know that, it will load codec to DSP
processor? And how GStreamer will communicate with DSP Processor?
Please help me....
Thank you,
Raghu
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Gstreamer-embedded mailing list
Gstreamer-embedded@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gstreamer-embedded
