Hi Felipe,
This is really nice to have good guidance from your side. I will
explain you about my system side.
I have Fedora 11 installed on my system. GCC version is 4.4.1. To install
sbox2 i am following commands as followed.
I have downloaded sbox2-2.0 and qemu-0.11.0.tar.gz.
Both are resident in the following directory
/tmp/sbox2/sbox2-2.0
from here i have given following commands
./autogen.sh
make install prefix=/opt/sb2/
But my make fail and i have applied following patch and get success for
installing sbox2-2.0
--- include/config_hardcoded.h Thu Apr 02 02:06:14 2009
+++ include/config_hardcoded.h Thu Oct 15 19:06:34 2009
@@ -1,22 +1,21 @@
-
-/* Define to the type of arg 1 for `readlink'. */
-#define READLINK_TYPE_ARG1 const char *path
-
-/* Define to the type of arg 2 for `readlink'. */
-#define READLINK_TYPE_ARG2 char *buf
-
-/* Define to the type of arg 3 for `readlink'. */
-#define READLINK_TYPE_ARG3 size_t bufsiz
-
-/* Define to the type of arg 1 for `scandir'. */
-#define SCANDIR_TYPE_ARG1 const char *dir
-
-/* Define to the type of arg 2 for `scandir'. */
-#define SCANDIR_TYPE_ARG2 struct dirent ***namelist
-
-/* Define to the type of arg 3 for `scandir'. */
-#define SCANDIR_TYPE_ARG3 int(*filter)(const struct dirent *)
-
-/* Define to the type of arg 4 for `scandir'. */
-#define SCANDIR_TYPE_ARG4 int(*compar)(const void *,const void *)
-
+
+/* Define to the type of arg 1 for `readlink'. */
+#define READLINK_TYPE_ARG1 const char *path
+
+/* Define to the type of arg 2 for `readlink'. */
+#define READLINK_TYPE_ARG2 char *buf
+
+/* Define to the type of arg 3 for `readlink'. */
+#define READLINK_TYPE_ARG3 size_t bufsiz
+
+/* Define to the type of arg 1 for `scandir'. */
+#define SCANDIR_TYPE_ARG1 const char *dir
+
+/* Define to the type of arg 2 for `scandir'. */
+#define SCANDIR_TYPE_ARG2 struct dirent ***namelist
+
+/* Define to the type of arg 3 for `scandir'. */
+#define SCANDIR_TYPE_ARG3 int(*filter)(const struct dirent *)
+
+/* Define to the type of arg 4 for `scandir'. */
+#define SCANDIR_TYPE_ARG4 int(*compar)( (__const struct dirent **, __const
struct dirent **) )
--- preload/generate.py Thu Apr 02 02:06:14 2009
+++ preload/generate.py Thu Oct 15 19:03:24 2009
@@ -164,8 +164,8 @@
W('int rename(const char *oldpath, const char *newpath)', b_map("oldpath"),
b_map("newpath"))
W('int revoke(const char *file)', b_map("file"))
W('int rmdir(const char *pathname)', b_map("pathname"))
-W('int scandir(const char *dir, struct dirent ***namelist,
SCANDIR_TYPE_ARG3, int(*compar)(const void *, const void *))', b_map("dir"),
argnames=['dir','namelist','filter','compar'])
-W('int scandir64(const char *dir, struct dirent64 ***namelist,
int(*filter)(const struct dirent64 *), int(*compar)(const void *, const void
*))', b_map("dir"),argnames=['dir','namelist','filter','compar'])
+W('int scandir(const char *dir, struct dirent ***namelist,SCANDIR_TYPE_ARG3
, SCANDIR_TYPE_ARG4)', b_map("dir"),
argnames=['dir','namelist','filter','compar'])
+W('int scandir64(const char *dir, struct dirent64 ***namelist,
SCANDIR_TYPE_ARG3,SCANDIR_TYPE_ARG4)',
b_map("dir"),argnames=['dir','namelist','filter','compar'])
W('int setxattr(const char *path, const char *name, const void *value,
size_t size, int flags)', b_map("path"))
W('int stat(const char *file_name, struct stat *buf)', b_map("file_name"))
W('int stat64(const char *file_name, struct stat64 *buf)',
b_map("file_name"))
--- preload/interface.master Thu Apr 02 02:06:14 2009
+++ preload/interface.master Thu Oct 15 19:26:21 2009
@@ -407,8 +407,8 @@
#ifdef HAVE_SCANDIR
#ifdef HAVE_LINUX_SCANDIR
WRAP: int scandir(const char *dir, struct dirent ***namelist, \
- SCANDIR_TYPE_ARG3, int(*compar)(const void *, const void *)) : \
- map(dir) hardcode_param(3,filter)
+ int(*filter)(const struct dirent *), int(*compar)(const struct dirent **,
const struct dirent **)) : \
+ map(dir)
#endif
#ifdef HAVE_OSX_SCANDIR
WRAP: int scandir(const char *dirname, struct dirent ***namelist, int
(*select)(struct dirent *), int (*compar)(const void *, const void *)):
map(dirname)
@@ -417,7 +417,7 @@
#ifdef HAVE_SCANDIR64
WRAP: int scandir64(const char *dir, struct dirent64 ***namelist, \
int(*filter)(const struct dirent64 *), \
- int(*compar)(const void *, const void *)) : \
+ int(*compar)(const struct dirent64 **, const struct dirent64 **)) : \
map(dir)
#endif
#ifdef HAVE_SETXATTR
After that i have installed qemu by giving following commands.
./configure --prefix=/opt/qemu/ --target-list=arm-linux-user
make install
i have added sb3 bin path to my PATH variable.
My cross tool chain is installed at following path which is from
Codesourcery( Sourcery G++ Lite version) and
is installed at /opt/arm-2008q3/.
These are my system set up.
Now when i give following command to set up qemu for my cross tool chain it
gives following error.
[r...@fedora libc]# sb2-init -c /opt/qemu/bin/qemu-arm armv7
/opt/arm-2008q3/bin/arm-none-linux-gnueabi-gcc
Info: Mapping mode not specified, using default (simple)
Using /opt/arm-2008q3/bin/arm-none-linux-gnueabi-gcc to detect target
architecture:
Finished writing sb2.gcc.config
gcc configured.
sb2-init: Target architecture is 'arm'
sb2-init: Host architecture is 'i[3456]86'
Finished writing sb2.config
sb2-init: configuring libtool for this target:
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore
segment prot after reloc: Permission denied
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C
compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
Running /opt/sb2/bin/sb2-build-libtool failed
You can run this manually later, otherwise your
sb2 environment is correctly setup and ready to use
After this when i configure glib by appluing following command, i can not
configure it and it gives following error.
[r...@fedora libc]# cd /tmp/gstreamer/glib-2.16.6
[r...@fedora glib-2.16.6]# sb2
./configure --prefix=/opt/gstreamer_beagle/ --disable-static
--with-html-dir=/tmp/dump
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore
segment prot after reloc: Permission denied
/opt/qemu/bin/qemu-arm: error while loading shared libraries: cannot restore
segment prot after reloc: Permission denied
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking whether to enable maintainer-specific portions of Makefiles... no
checking build system type... arm-unknown-linux-gnueabi
checking host system type... arm-unknown-linux-gnueabi
checking for the BeOS... no
checking for Win32... no
checking for Mac OS X Carbon support... checking for style of include used
by make... GNU
checking for gcc... gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... configure: error: cannot run C
compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details.
Please guide me in this situation.
Thanks in Advance,
Tejas.
----- Original Message -----
From: "Felipe Contreras" <felipe.contre...@gmail.com>
To: "Tejas Bhanabhagavanwala" <te...@oriolesoftware.com>
Cc: "Nigel Hsiung" <nige...@hotmail.com>; "gst mailing list"
<gstreamer-embedded@lists.sourceforge.net>
Sent: Thursday, October 15, 2009 1:06 AM
Subject: Re: [gst-embedded] New to gstreamer
On Wed, Oct 14, 2009 at 2:35 PM, Tejas Bhanabhagavanwala
<te...@oriolesoftware.com> wrote:
> Hi Felipe,
> I have tried with scratchbox 1. SB1 has been installed
> successfully. But when i tried to configure glib2.16.2 with following
> command.
>
> [sbox-armv7: ~] > ./configure --prefix="$prefix" --disable-static
> --with-html-dir=/tmp/dump --host=arm-none-linux-gnueabi
Why did you add the '--host' option? It's nowhere on any instructions.
Read this carefully: scratchbox was created to forget about
cross-compilation; you don't need to specify the host, target, or
anything.
> it gives following error.Please find log of configure command as
> followed.
Of course it's failing because it thinks it's cross-compiling, so it's
not using scratchbox.
> checking whether we are cross compiling... yes
This question has nothing to do with GStreamer, you should ask it in
the scratchbox mailing list.
Cheers.
--
Felipe Contreras
------------------------------------------------------------------------------
Come build with us! The BlackBerry(R) Developer Conference in SF, CA
is the only developer event you need to attend this year. Jumpstart your
developing skills, take BlackBerry mobile applications to market and stay
ahead of the curve. Join us from November 9 - 12, 2009. Register now!
http://p.sf.net/sfu/devconference
_______________________________________________
Gstreamer-embedded mailing list
Gstreamer-embedded@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gstreamer-embedded
