I had a working build process for 2.6.29 using OpenEmbedded/bitbake and
ti-gstreamer that would allow me to run the TI CodecEngine using ti-gstreamer.
I recently moved to 2.6.30 to incorporate a camera driver that support V4L2 as
the next step in building up a system that supports video encoding from that
camera.
However, I have run into some difficulties with this new build and I am hoping
that someone might recognize the source of my error.
Below is the output from my attempt to run a simple gst-launch sequence, but
the essence of the error appears to be from:
> 019490] ti.sdo.ce.ipc.Power - Power_on> Opening Local Power Manager for the
> DSP on /dev/lpm0...
> @2,013,793us: [+2 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> Turning on
> DSP power...
> @2,013,915us: [+7 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> Turning on
> DSP power FAILED
During the boot process, the kernel reports that APM is not built into the
system. Is APM needed for LPM to work?
Any suggestions on how to tackle figuring out what is not right about this
configuration?
Thanks,
Charlie
> r...@overo:~# CE_DEBUG=1 gst-launch --gst-debug=1 -v videotestsrc pattern=1
> num-
> buffers=60 ! TIVidenc1 codecName=h264 engineName=codecServer ! filesink
> location
> =first.264
> @0,563,171us: [+6 T:0x40020310] CE - Engine_init> CE debugging on
> (CE_DEBUG=1; allowed CE_DEBUG levels: 1=min, 2=good, 3=max)
> Setting pipeline to PAUSED ...
> /GstPipeline:pipeline0/GstVideoTestSrc:videotestsrc0.GstPad:src: caps =
> video/x-raw-yuv, format=(fourcc)UYVY, width=(int)320, height=(int)240,
> framerate=(fraction)30/1
> Pipeline is PREROLLING ...
> /GstPipeline:pipeline0/GstTIVidenc1:tividenc10.GstPad:sink: caps =
> video/x-raw-yuv, format=(fourcc)UYVY, width=(int)320, height=(int)240,
> framerate=(fraction)30/1
> @0,680,572us: [+7 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> Turning on
> DSP power FAILED
> @0,680,663us: [+6 T:0x41019490] OP - Processor_create_d> Power_on failed.
> @0,680,755us: [+6 T:0x42068490] CE - rserverOpen: can't start
> '/usr/share/ti/codec-combo/cs.x64P'; Processor_create failed
> ERROR: from element /GstPipeline:pipeline0/GstTIVidenc1:tividenc10: failed to
> open codec engine "codecServer"
>
> Additional debug info:
> gsttividenc1.c(1446): gst_tividenc1_codec_start ():
> /GstPipeline:pipeline0/GstTIVidenc1:tividenc10
> ERROR: pipeline doesn't want to preroll.
> Setting pipeline to NULL ...
> gst-launch-0.10: BufTab.c:440: BufTab_getNumBufs: Assertion `hBufTab' failed.
> Aborted
> r...@overo:~# CE_DEBUG=2 gst-launch --gst-debug=1 -v videotestsrc pattern=1
> num-
> buffers=60 ! TIVidenc1 codecName=h264 engineName=codecServer ! filesink
> location
> =first.264
> @0,886,199us: [+4 T:0x40020310] OG - Global_init> This program was built with
> the following packages:
> @0,886,443us: [+4 T:0x40020310] OG - package gnu.targets.arm.rtsv5T
> (/home/charlie/pixhawk-oe-tmp/staging/i686-linux/ti-xdctools-native/packages/gnu/targets/arm/rtsv5T/)
> [1, 0, 0, 0]
<snip>
> @0,886,657us: [+4 T:0x40020310] OG - package ti.sdo.codecs.h264dec
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-codecs/packages/ti/sdo/codecs/h264dec/)
> [1, 0, 0]
> @0,886,718us: [+4 T:0x40020310] OG - package ti.sdo.codecs.h264enc
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-codecs/packages/ti/sdo/codecs/h264enc/)
> [1, 0, 0]
> <snip>
> @0,886,993us: [+4 T:0x40020310] OG - package ti.sdo.linuxutils.sdma
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-linuxutils/packages/ti/sdo/linuxutils/sdma/)
> [1, 0, 0]
> @0,887,023us: [+4 T:0x40020310] OG - package ti.sdo.linuxutils.cmem
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-linuxutils/packages/ti/sdo/linuxutils/cmem/)
> [2, 2, 0]
> @0,887,084us: [+4 T:0x40020310] OG - package ti.sdo.fc.global
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/fc/global/)
> [1, 0, 0]
> @0,887,115us: [+4 T:0x40020310] OG - package ti.sdo.fc.scpy
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/fc/scpy/)
> [1, 0, 0]
> @0,887,176us: [+4 T:0x40020310] OG - package ti.sdo.ce.global
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-codec-engine/packages/ti/sdo/ce/global/)
> [1, 0, 0]
> @0,887,237us: [+4 T:0x40020310] OG - package ti.xdais.dm
> (/home/charlie/pixhawk-oe-tmp/staging/i686-linux/ti-xdais/packages/ti/xdais/dm/)
> [1, 0, 5]
> @0,887,267us: [+4 T:0x40020310] OG - package ti.sdo.utils.trace
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/utils/trace/)
> [1, 0, 0]
> @0,887,328us: [+4 T:0x40020310] OG - package ti.sdo.ce.utils.xdm
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-codec-engine/packages/ti/sdo/ce/utils/xdm/)
> [1, 0, 2]
> @0,887,359us: [+4 T:0x40020310] OG - package dsplink.gpp
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-dsplink-module/packages/dsplink/gpp/)
> [5, 0, 0]
> @0,887,420us: [+4 T:0x40020310] OG - package ti.bios.power
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-codec-engine/cetools/packages/ti/bios/power/)
> [1, 1, 1]
> @0,887,481us: [+4 T:0x40020310] OG - package ti.xdais
> (/home/charlie/pixhawk-oe-tmp/staging/i686-linux/ti-xdais/packages/ti/xdais/)
> [1, 2.0, 1]
> @1,222,564us: [+4 T:0x40020310] OG - package ti.sdo.ce.node
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-codec-engine/packages/ti/sdo/ce/node/)
> [1, 0, 0]
> @1,222,625us: [+4 T:0x40020310] OG - package ti.sdo.fc.memutils
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/fc/memutils/)
> [1, 0, 0]
> @1,222,686us: [+4 T:0x40020310] OG - package ti.sdo.fc.utils
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/fc/utils/)
> [1, 0, 2]
> @1,222,717us: [+4 T:0x40020310] OG - package ti.sdo.fc.dman3
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/fc/dman3/)
> [1, 0, 4]
> @1,222,778us: [+4 T:0x40020310] OG - package ti.sdo.fc.acpy3
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-framework-components/packages/ti/sdo/fc/acpy3/)
> [1, 0, 4]
> <snip>
> @1,559,326us: [+4 T:0x40020310] OG - package ti.sdo.dmai
> (/home/charlie/pixhawk-oe-tmp/staging/overo-angstrom-linux-gnueabi/ti-dmai/packages/ti/sdo/dmai/)
> [1, 0, 0]
> @1,559,387us: [+4 T:0x40020310] OG - package gstticodecplugin_omap3530
> (/home/charlie/pixhawk-oe-tmp/work/overo-angstrom-linux-gnueabi/gstreamer-ti-svnr459-r37/gstreamer_ti/ti_build/ticodecplugin/src/gstticodecplugin_omap3530/)
> []
> @1,559,631us: [+0 T:0x40020310] ti.sdo.ce.osal.Sem - Sem_create> count: 0
> @1,559,692us: [+0 T:0x40020310] ti.sdo.ce.osal.Sem - Leaving Sem_create>
> sem[0xd5288]
> @1,559,722us: [+0 T:0x40020310] ti.sdo.ce.osal.Sem - Sem_create> count: 0
> @1,559,783us: [+0 T:0x40020310] ti.sdo.ce.osal.Sem - Leaving Sem_create>
> sem[0xd52a0]
> @1,559,814us: [+0 T:0x40020310] OT - Thread_create> Enter (fxn=0x4065aff0,
> attrs=0x0)
> @1,894,927us: [+1 T:0x41019490] OP - daemon> thread created.
> @1,894,988us: [+0 T:0x41019490] OP - getCmd_d> Enter (proc=0x41018dd8)
> @1,895,049us: [+0 T:0x41019490] ti.sdo.ce.osal.Sem - Entered Sem_pend>
> sem[0xd5288] timeout[0xffffffff]
> @1,895,110us: [+0 T:0x40020310] OT - Thread_create> Exit (task=0xd52d8)
> @1,895,233us: [+0 T:0x40020310] ti.sdo.ce.alg - ALG_init> Enter
> @1,895,294us: [+0 T:0x40020310] ti.sdo.ce.alg - ALG_init> Exit
> @1,895,385us: [+6 T:0x40020310] CE - Engine_init> CE debugging on
> (CE_DEBUG=2; allowed CE_DEBUG levels: 1=min, 2=good, 3=max)
> @1,895,446us: [+0 T:0x40020310] CS - Server_init()
> @1,895,507us: [+0 T:0x40020310] CS - Server_init> Global_useLinkArbiter = 0
> Setting pipeline to PAUSED ...
> /GstPipeline:pipeline0/GstVideoTestSrc:videotestsrc0.GstPad:src: caps =
> video/x-raw-yuv, format=(fourcc)UYVY, width=(int)320, height=(int)240,
> framerate=(fraction)30/1
> Pipeline is PREROLLING ...
> /GstPipeline:pipeline0/GstTIVidenc1:tividenc10.GstPad:sink: caps =
> video/x-raw-yuv, format=(fourcc)UYVY, width=(int)320, height=(int)240,
> framerate=(fraction)30/1
> @2,012,969us: [+0 T:0x42068490] CE - Engine_open> Enter('codecServer', 0x0,
> 0x42067c8c)
> @2,013,091us: [+0 T:0x42068490] CE -
> rserverOpen('/usr/share/ti/codec-combo/cs.x64P'), count = 0
> @2,013,122us: [+0 T:0x42068490] OP - Processor_create>
> Enter(imageName='/usr/share/ti/codec-combo/cs.x64P', linkCfg='(null)',
> attrs=0x42067c70)
> @2,013,244us: [+0 T:0x42068490] OP - doCmd> Enter (cmdId=1, proc=0x17698)
> @2,013,305us: [+0 T:0x42068490] ti.sdo.ce.osal.Sem - Entered Sem_post>
> sem[0xd5288]
> @2,013,366us: [+0 T:0x42068490] ti.sdo.ce.osal.Sem - Leaving Sem_post>
> sem[0xd5288]
> @2,013,427us: [+0 T:0x42068490] ti.sdo.ce.osal.Sem - Entered Sem_pend>
> sem[0xd52a0] timeout[0xffffffff]
> @2,013,488us: [+0 T:0x41019490] ti.sdo.ce.osal.Sem - Leaving Sem_pend>
> sem[0xd5288] status[0]
> @2,013,549us: [+0 T:0x41019490] OP - getCmd_d> Exit (result=1)
> @2,013,580us: [+0 T:0x41019490] OP - Processor_create_d> Enter(proc=0x17698)
> @2,013,641us: [+0 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on>
> Enter(handle=0x176b4)
> @2,013,671us: [+2 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> Opening Local
> Power Manager for the DSP on /dev/lpm0...
> @2,013,793us: [+2 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> Turning on
> DSP power...
> @2,013,915us: [+7 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> Turning on
> DSP power FAILED
> @2,013,976us: [+2 T:0x41019490] ti.sdo.ce.ipc.Power - Power_on> return (1)
> @2,014,037us: [+6 T:0x41019490] OP - Processor_create_d> Power_on failed.
> @2,014,068us: [+2 T:0x41019490] OP - Processor_create_d> return (0)
> @2,014,129us: [+0 T:0x41019490] ti.sdo.ce.osal.Sem - Entered Sem_post>
> sem[0xd52a0]
> @2,014,190us: [+0 T:0x42068490] ti.sdo.ce.osal.Sem - Leaving Sem_pend>
> sem[0xd52a0] status[0]
> @2,014,221us: [+0 T:0x42068490] OP - doCmd> Exit (result=2)
> @2,014,282us: [+0 T:0x42068490] OP - Processor_delete> Enter(proc=0x17698)
> @2,014,312us: [+1 T:0x42068490] OP - Processor_delete(0x17698) freeing object
> ...
> @2,014,373us: [+0 T:0x42068490] OP - Processor_delete> return.
> @2,014,404us: [+6 T:0x42068490] CE - rserverOpen: can't start
> '/usr/share/ti/codec-combo/cs.x64P'; Processor_create failed
> @2,014,465us: [+0 T:0x42068490] CE -
> rserverOpen('/usr/share/ti/codec-combo/cs.x64P'): 0x0 done.
> @2,014,495us: [+0 T:0x42068490] CE - Engine_close(0x38b00)
> @2,014,556us: [+0 T:0x42068490] CS - Server_disconnectTrace('0x38b00', 0x0)
> @2,014,587us: [+0 T:0x42068490] CS - Server_connectTrace> return(0)
> @2,014,648us: [+0 T:0x42068490] CE - Engine_open> return(0)
> ERROR: from element /GstPipeline:pipeline0/GstTIVidenc1:tividenc10: failed to
> open codec engine "codecServer"
>
> Additional debug info:
> gsttividenc1.c(1446): gst_tividenc1_codec_start ():
> /GstPipeline:pipeline0/GstTIVidenc1:tividenc10
> ERROR: pipeline doesn't want to preroll.
> Setting pipeline to NULL ...
> @2,016,937us: [+0 T:0x41019490] ti.sdo.ce.osal.Sem - Leaving Sem_post>
> sem[0xd52a0]
> @2,017,028us: [+0 T:0x41019490] OP - getCmd_d> Enter (proc=0x41018dd8)
> @2,017,059us: [+0 T:0x41019490] ti.sdo.ce.osal.Sem - Entered Sem_pend>
> sem[0xd5288] timeout[0xffffffff]
> gst-launch-0.10: BufTab.c:440: BufTab_getNumBufs: Assertion `hBufTab' failed.
> Aborted
> r...@overo:~#
------------------------------------------------------------------------------
Download Intel® Parallel Studio Eval
Try the new software tools for yourself. Speed compiling, find bugs
proactively, and fine-tune applications for parallel performance.
See why Intel Parallel Studio got high marks during beta.
http://p.sf.net/sfu/intel-sw-dev
_______________________________________________
Gstreamer-embedded mailing list
Gstreamer-embedded@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/gstreamer-embedded
