You'll need to set the data_interface configuration parameter on the
server. You can either set globally it in a gridftp.conf
(/etc/grid-security/gridftp.conf or $GLOBUS_LOCATION/etc/gridftp.conf)
with the line:
data_interface xxx.xxx.xxx.xxx
or edit /etc/grid-security/sshftp to put the -data-interface option on
the command line to only enable it for sshftp.
Mike
On Tue 8/24/2010 8:25 AM, Hoot Thompson wrote:
All the pieces seem to be basically working and I'm able to transfer
data between my two test servers using ssh authentication. However, my
servers are multi-homed with both GigE and 10 GigE links. My goal is get
data transferred over the 10 GIgE link but even though the initial
authentication seems to be going over the 10GigE link, data is going
over the regular GIgE link. Best I can tell is that I'm stuck in passive
mode, agree? How do I configure for active mode (assuming that will
rectify my problem)?
Thanks in advance!
