Hi,
Did you give the proper DNS name (or IP address) of the server when
you generated its host key (Common Name)? If you thought it was asking
or your name instead of the server's name, then this will happen.
Prakash
On Aug 31, 2010, at 11:53 AM, Hoot Thompson wrote:
Back again....
This one has me really confused. I somehow ended up with my name as
the authenticated hostname and I can't figure out how. Looking at
the pem files, all appears well but something is obviously amiss.
The expected name for the remote host ([email protected]
) does not match the authenticated name of the remote host (Hoot
Thompson)
-----Original Message-----
From: Michael Link <[email protected]>
To: Hoot Thompson <[email protected]>
Cc: Martin Feller <[email protected]>, [email protected]
Subject: Re: [gt-user] Stripe mode over multiple links between two
servers
Date: Fri, 27 Aug 2010 13:56:20 -0500
On Fri 8/27/2010 7:27 AM, Hoot Thompson wrote:
> Perhaps I'm making this too hard. I follow these instructions.....
>
> Chapter 2. Configuring
> 1. Configure SimpleCA for multiple machines
> So far, you have a single machine configured with SimpleCA
certificates.
> Recall that in Section 2.5, “Confirm generated
> certificate” a CA setup package was created in
> .globus/simpleCA/globus_simple_ca_HASH_setup-
> 0.17.tar.gz. If you want to use your certificates on another
machine,
> you must install that CA setup package on
> that machine.
> To install it, copy that package to the second machine and run:
> $GLOBUS_LOCATION/sbin/gpt-build
globus_simple_ca_HASH_setup-0.17.tar.gz
> gcc32dbg
> $GLOBUS_LOCATION/sbin/gpt-postinstall
> Then you will have to perform setup-gsi -default from Section 2.6,
> “Complete setup of GSI”.
> If you are going to run services on the second host, it will need
its
> own host certificate (Section 3, “Host certificates”)
> and grid-mapfile (as described in the basic configuration
instructions
> in Section 3, “Add authorization”).
> You may re-use your user certificates on the new host. You will
need to
> copy the requests to the host where the Sim-
> pleCA was first installed in order to sign them.
>
>
> Everything goes well until I get to the part that says "If you are
going
> to run services on the second host, it will need its own host
> certificate (Section 3, “Host certificates”)
> and grid-mapfile (as described in the basic configuration
instructions
> in Section 3, “Add authorization”)." I can create the host
certificate
> but I can't sign it due to the previously mentioned error. So your
> comment says I should sign the second machine's certificate on the
first
> machine and then bring it back. I'll give it a try. Bottom line is
all
> I'm trying to do is get two machines trusted so I can try striped
transfers.
>
> Hoot
>
Right, what Martin suggested should work. That package that you
installed on the second machine is simply the CA certificates that
enable the other machines to trust that CA and the certificates it
signs. The CA itself only lives on a single machine.
>
> -----Original Message-----
> *From*: Martin Feller <[email protected]
> <mailto:martin%20feller%20%[email protected]%3e>>
> *To*: Hoot Thompson <[email protected]
> <mailto:hoot%20thompson%20%[email protected]%3e>>
> *Cc*: [email protected] <mailto:[email protected]>
> *Subject*: Re: [gt-user] Stripe mode over multiple links between
two servers
> *Date*: Fri, 27 Aug 2010 07:04:53 -0500
>
> The CA itself should stay on one machine and should not be copied to
> multiple nodes in a grid. It's probably only located on the first
> machine in your case.
> Does it work if you copy the host certificate request from the
second
> machine to the first machine, sign it there, and copy the generated
> certificate back to the second machine, where the corresponding
private
> key of the host certificate lives?
>
> Martin
>
