Hi Nicole,
Debug info shows that globus-url-copy communicates with a GridFTP server
on control channel, opens and listens locally (192.168.1.119) port 57333
and waits for a data connection from the GridFTP server. I suspect that
there is a firewall somewhere between globus-url-copy and the GridFTP
server blocking TCP connection needed to open data channel. You can use:
# netstat -atnp
to see open TCP ports and established TCP connections.
If it does not help you can use 'tcpdump' or more friendly 'wireshark'
to capture packets sent between client and server machines and
investigate if any of those packets were dropped between those two machines.
Regards,
Lukasz
On 5/24/11 8:36 AM, Nicole wrote:
Hello ,
I have a question of globus-url-copy, I use two PC, create CA server and client
i can use client send to server, but when server send to client ,it waited 10
minutes but nothing happened. Please give me some advice..thank you.
This is my debug info:
debug: sending command to gsiftp://client/tmp/testp:
TYPE I
debug: response from gsiftp://client/tmp/testp:
200 Type set to I.
debug: sending command to gsiftp://client/tmp/testp:
MODE E
debug: response from gsiftp://client/tmp/testp:
200 Mode set to E.
debug: sending command to gsiftp://client/tmp/testp:
PBSZ 1048576
debug: response from gsiftp://client/tmp/testp:
200 PBSZ=1048576
debug: sending command to gsiftp://client/tmp/testp:
PASV
debug: response from gsiftp://client/tmp/testp:
227 Entering Passive Mode (192,168,1,119,225,133)
debug: sending command to gsiftp://client/tmp/testp:
ALLO 5
debug: response from gsiftp://client/tmp/testp:
200 ALLO command successful.
debug: sending command to gsiftp://client/tmp/testp:
STOR /tmp/testp
debug: sending command to gsiftp://server/home/select/test:
MODE E
debug: response from gsiftp://server/home/select/test:
200 Mode set to E.
debug: sending command to gsiftp://server/home/select/test:
PBSZ 1048576
debug: response from gsiftp://server/home/select/test:
200 PBSZ=1048576
debug: sending command to gsiftp://server/home/select/test:
PORT 192,168,1,119,225,133
debug: response from gsiftp://server/home/select/test:
200 PORT Command successful.
debug: sending command to gsiftp://server/home/select/test:
RETR /home/select/test
