Hi Fabio,
The libraries we depend on on CentOS 6 are a lower version than we have
tested with. I believe they can be made to work though. If that is the
case we should be able to release something within a few weeks.
Mike
On 12/11/2013 1:37 PM, Fabio Moreira wrote:
Hi Joe,
I´m using CentOS 6.4 and CentOS 6.3.
On Wed, Dec 11, 2013 at 5:14 PM, Joseph Bester <[email protected]
<mailto:[email protected]>> wrote:
Which operating system are you using? The RPM is available for
Fedora 18 and 19. I think there were some issues with UDT
dependencies on the other RPM platforms we normally support.
Joe
On Dec 10, 2013, at 1:57 PM, Fabio Moreira <[email protected]
<mailto:[email protected]>> wrote:
Dear Liam,
Thank you very much for the answer. But I'd like to install with
the rpm package as announced with GT 5.2.5 release notes. Anyway
it will be very helpful.
Best Regards.
Fabio MS
On Wed, Nov 27, 2013 at 7:20 PM, Liam Cervante
<[email protected] <mailto:[email protected]>> wrote:
Hi Fabio,
I think the problem is that
libglobus_xio_udt_driver_gcc64pthr.so is not on your machine,
I don't think the gridftp package installs it. Pre 5.2.5 the
only way I could get the driver was to use the source
installer and build the driver manually. The docs provide a
walkthrough:
http://toolkit.globus.org/toolkit/docs/latest-stable/gridftp/admin/#gridftp-config-udt.
However, the release notes in 5.2.5 say that RPM packaging for
UDT is now provided,
http://toolkit.globus.org/toolkit/docs/5.2/5.2.5/xio/rn/#xio-changes-summary.
The process I followed just now to get the drivers on an
Ubuntu machine was:
1. Download the required repo from
http://www.globus.org/ftppub/gt5/5.2/5.2.5/installers/repo/,
in my case globus-repository-5.2-stable-precise_0.0.3_all.deb
<http://www.globus.org/ftppub/gt5/5.2/5.2.5/installers/repo/globus-repository-5.2-stable-precise_0.0.3_all.deb>
2. sudo dpkg -i globus-repository-5.2-stable-precise_0.0.3_all.deb
3. sudo apt-get update
4. sudo apt-get install libglobus-xio-udt-driver0
libglobus-xio-udt-driver-dev
After that I have the following files:
/usr/include/globus/globus_xio_udt_ref.h
/usr/lib/libglobus_xio_udt_driver.la
<http://libglobus_xio_udt_driver.la/>
/usr/lib/libglobus_xio_udt_driver.so
/usr/lib/libglobus_xio_udt_driver.so.0
/usr/lib/libglobus_xio_udt_driver.so.0.0.6
I'm not sure what you are running the server on, but hopefully
the process isn't too different.
Hope this helps,
Liam
On Thu, Nov 28, 2013 at 2:01 AM, Fabio Moreira
<[email protected] <mailto:[email protected]>> wrote:
Hi,
I would like to know if anyone made any transfer with
GridFTP through UDT with GT 5.2.5. I've upgraded a GridFTP
server by yum and made the configuration in order to use
UDT (dc_whitelist udt,gsi,tcp into /etc/gridftp.conf) and
with a simple test I've got the following error about
driver activation failed.
telnet server1.mydomain 2811
Trying 10.0.0.1...
Connected to server1.
Escape character is '^]'.
[5286] Wed Nov 27 10:53:45 2013 :: Some network stack
drivers failed to load: globus_xio: driver activation failed.
globus_extension_module: Couldn't dlopen
libglobus_xio_udt_driver_gcc64pthr.so in /usr/lib64 (or
LD_LIBRARY_PATH): file not found
220 server1.mydomain GridFTP Server 6.38 (gcc64,
1382984154-83) [Globus Toolkit 5.2.5] ready.
Connection closed by foreign host.
Thanks in advance for any help.
Best Regards,
Fabio MS
--
*Liam Cervante*
*Developer | **GreenButton Limited *| www.greenbutton.com
<http://www.greenbutton.com/>
Level 2, James Smith Building, 55 Cuba Street, Wellington, New
Zealand
Skype liam.cervante| [email protected]
<mailto:[email protected]> | +64 4 974 6611
<tel:%2B64%204%20974%206611>
--
Fábio MS
