Dave Ball wrote: > For the WM3236AQ part: > - the sdio/spi pins are only named with their sdio use - it would > probably be worth adding their spi uses too.
Good idea. > - On most components, we haven't drawn NC pins, is there any reason to > include them here? Well, I just followed the OM schematics, that is the only reason actually. What's the impact of omitting them on the symbol? > and the schematic: > - R7907 should be named R7904 and vice-versa. I'm to rename all components in this sheet to 8xxx. I'll ensure mapping (in an ECN) will be correct then. > - R7904-9 are missing their connection to WLAN3v3 Fixed. > - There are missing connections between the SPIMISO and INT labels, and > their testpoints Well caught, thanks. > - the PWR_FLG on the WLAN3v3 net should be moved to avoid a cross joint. Done. > - TP7901-10 are new since gta02, so could be renumbered as makes sense > on the current schematics. They all will be renamed, as previously stated. > Is the hope to use the same shielding can used on the gta02 WLAN > daughter-board? It might be worth including the shielding points for > connecting to the can, so we don't forget them at PCB time! That was something I asked a while ago. We are not using these shielding points in any other sheet, are we ? >> I renamed the old wlan sheet to "wlan-conn.sch" so we can go back if >> needed, just changing the project file. >> > No need for this - we have SVN :-) Sure we do, but this allows you to switch from one to another quickly. So if you just want state-of-the-art design plus the old daugherboard, just change the project file. Best, Álvaro _______________________________________________ gta02-core mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/gta02-core
