Werner Almesberger wrote: > Rene Harder wrote: > >> [1] http://www.4pcb.com/ >> [2] >> http://www.4pcb.com/media/Capabilities%20August%2009%20-%20PDF%20version.pdf >> > > Thanks ! When I run the following specs (ballpark figures): > > Board 3 in x 4 in > Array 15 in x 6 in, 4 boards (wild guess) > FR4, 40 mil thick, ENIG, 1 oz copper, 5 mil traces, > solder mask and silkscreen both sides, default colors, > smallest hole 8 mil, SMT pitch 15 mil, 100 pads on top, > 1000 bottom, no extra features. > > Then I get a per-board price, for 20 units: > > 1 week 2 weeks 3 weeks 4 weeks > 93.82 71.82 66.32 60.81 (all USD) > > plus Tooling USD 530 > Testing USD 620 > > So for the 2 weeks option, that would be a per-board price of about > USD 130 plus shipping, import, etc. They don't have online quotes > for stencils, but if I take the price from wedirekt, then a stencil > for the whole array should cost about EUR 160, again plus > international shipping. (If we use a two up, two down configuration > for the array, we may need only one stencil.) > > That's pretty good. My estimate was in the EUR 200 range, while this > is only a bit less than EUR 150, all costs considered. > > No microvias, though. Sniff. >
If you want I can try to get a quote with micro- and/or filled vias, so we can place the vias directly in the solder land. Rene _______________________________________________ gta02-core mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/gta02-core
