[Werner Almesberger Do 12. November 2009]: > I've implemented the LDO2/LDO4 swap now. To keep things clear, I > swapped the whole circuit hanging off the respective LDO, not > just the power nets and 1714 > > Note that CODEC_3V3 has its large reservoir capacitor (10 uF) on > the AUDIO sheet. > > Anyone care to review so that we can move it to "Done" ? > > - Werner
* C4119..22, +..28 move to other side of choke (see b3004, also see suggestion below to change all to C-L-C). *rename C3016 -> c4496 (complementary to C4406), to make mic path pseudo-sym. GND of C4496 next to gnd of jk4401 *suggestion: 1nF jk4401:6 to GND, to RF short HS MIC path when nothing plugged in *r4303, c4306 buzzfix not implemented ... ? thought we go make that path symmetric like formerly done anyway, so r4303 mustn't 0R c4307 is a nonsense, even to have pads for it. Remove C4307 footprints we should replace (A)-R4305-(B) by (A)-R4305-(X), (X)-C4306_NC-(GND), (X)-R4399_0R-(B) move C4303, C4304, R4305 next to wm8753, behind B3005 *make B3005 (and B4105, B3004) look like decent C-L-C filters, like e.g B4419 *kill R3004, R3005 finally! *c3017 -> 1uF ? *c3003 AND c3008??? Seems we don't need both c3002 same do we need B3001?? esp if we kill B3001, then c3001 AND c3005 also one of both is senseless *suggestion: place 100pF RF suppressor C parallel to C3014, C3012 and C3013 - we learned RF creeps in here and causes buzz. the uF-Cs are not sufficient for RF /j
signature.asc
Description: This is a digitally signed message part.
_______________________________________________ gta02-core mailing list [email protected] https://lists.openmoko.org/mailman/listinfo/gta02-core
