Hi,

On Thu, 22 Feb 2018 08:06:13 +0100
"H. Nikolaus Schaller" <h...@goldelico.com> wrote:

> Hi,
> 
> > Am 21.02.2018 um 23:16 schrieb tgrauss <tgra...@f-gp.eu>:
> > 
> > Hi,
> > 
> > Good news :)
> > I have tried the  "DEV=/dev/sdb ./makesd qtmoko" method on my gta04a5.
> > I still have the bootloader, but then when it boots, I have a black
> > screen.  
> 
> Oops.
> 
> > Of course I have change sdb by the device of my sd card.
> > 
> > Any idea?  
> 
> Does a tiny white cursor blink - at least for some seconds?
> 
> Can you check what happens with the serial console or try ssh over 
> USB/Ethernet-gadget?
> 
> As an alternative you could try:
> 
> DEV=/dev/sdb ./makesd gta04one -r qtmoko
> 
> This will try to flash a new u-boot (if needed).
> 
> I just have a device running with this setup and I am trying
> to flash the QtMoko into NAND (which seems to be tricky because
> QtMoko has a timer and sends the device to suspend in between).
> 
/etc/init.d/qtmoko-gta04 stop

and you should have no unwanted pm anymore.

Regards,
Andreas

Attachment: pgpx6ieZX97bH.pgp
Description: OpenPGP digital signature

_______________________________________________
Gta04-owner mailing list
Gta04-owner@goldelico.com
http://lists.goldelico.com/mailman/listinfo.cgi/gta04-owner

Reply via email to