This is the information I have.
So you want the front swingarm protector kit, eh? I added one to mine and
it looks great.
PARTS INFORMATION
PART # DESCRIPTION QTY Price Where to Order
=====================================================================
90891-20059 Cover Kit(GTS) 1 $60.00 US Canada only
----------------------------------------------------------------------
This kit includes the following parts:
======================================================================
Ref. # Part # Description QTY Price US $
======================================================================
21 4BH-23132-00 Cover, Outer 2(left) 1pc $70.22
22 90150-06031 Screw, round head 1pc 1.69
23 4BH-23133-00 Cover, lower 2(right) 1pc 92.64
24 90154-05002 Screw 2pc 2.60
25 90179-05523 Nut (rivnut) 2pc 1.61
26 26A-21652-00 Protector 2pc 1.63
======================================================================
Total $US for individual pc's $173.23
Plus tax.
The Cover Kit is still available in Canada... get your credit card handy
and call: Pacific Yamaha Tel: 604-276-2552
This will save you money!!!!
-----------------------------------------------------------------------
SERVICE PROCEDURE:
-----------------------------------------------------------------------
1. Place the motorcycle on the center stand.
2. Position the left side cover #21 (4BH-23132-00) on the lower arm to make
a punch mark for the drill hole using the cover as a template.
3. Drill a hole with the proper size drill bit for a 6mm. X 1.0mm tap, then
tap the hole.
4. Mount the left side cover with the screw #22 (90150-06031).
5. Stick the protectors #26 (2pc. 26A-21652-00) on the inside of the right
side cover #23 (4BH-23133-00) at the top mould line mark of the swing arm,
one protector at each end of the right side cover. (this should allow the
cover to rest on top of the swing arm with these protectors between the
cover and top of the swing arm)
6. Position the right side cover #23(4BH-23133-00) on the lower arm to make
two punch marks for the drill holes using the right cover as a template.
7. Drill two holes with a 9.6mm drill into the arm.
8. Insert the rivnuts #25(90179-05523) in these holes.
9. Mount the right side cover with screws #24(90154-05002).
NOTE: Do not press too hard on the rivnuts, otherwise you may press
the pop nuts into the lower arm.
Kevin Hawkins // Greensboro, NC
[EMAIL PROTECTED]
http://cfm-resources.com/r/raddboy
Y2K Kawasaki ZRX1100 //'93 Yamaha GTS1000 //'85 FZ750
I would like to buy the swingarm protection kit for my 93. Wasn't there
a canadian dealer who was giving us a deal?
Anyone have that dealer info?
Jason
"Flood City III"
