Our emails were down yestreday - so this is a resend.
-----Original Message-----
From: John Davies
Sent: 18 June 2001 10:00
To: 'Barry Edwards'
Cc: GTS-1000@LISTSERV. UGA. EDU (E-mail)
Subject: RE: Krauser Luggage
Barry,
Fit Givi plate on adaptor panel to fit 4 bolt holes under parcel shelf -
drawing attached - I actually used 8mm aluminium with no returns in the end.
Carrying weight is limited as these are only small bolts and are on small
fixing centres - play around with the bolt sizes - but watch you dont pierce
the fuse box which is underneath the parcel shelf.
John W. P. Davies - Product Manager
Trimension Systems,
Whittle House,
Marchants Way,
Burgess Hill,
West Sussex RH15 8QY, UK
tel: +44 1444 480 134 (direct)
tel: +44 1444 250 888 ext 234 (switchboard )
fax: +44 1444 250 777
<mailto:[EMAIL PROTECTED]>
<http://www.trimension-inc.com>
Trimension - making virtual applications a reality........
-----Original Message-----
From: Barry Edwards [mailto:[EMAIL PROTECTED]]
Sent: 17 June 2001 16:00
Subject: Krauser Luggage
My 'new' GTS is fitted with the Yamaha/Krauser luggage. I would like to fit
a top box, preferably to match the panniers. What is the best route ?
Any help appreciated.
Barry Edwards
GTS1000 '95 (Goes to the top of the list :>)
FJ1200 '90
YZR1000R(Ace) 98
http://www.fjmods.btinternet.co.uk/
