> Subject: FW: AW: HELP > > This may help..... > > ------ Forwarded Message >> From: Ralph Wei� <[EMAIL PROTECTED]> >> Reply-To: <[EMAIL PROTECTED]> >> Date: Fri, 20 Oct 2000 22:38:10 +0200 >> To: "John G. Laurenson, Jr." <[EMAIL PROTECTED]> >> Subject: AW: HELP >> >> <x-charset iso-8859-1>No, no, no >> Don�t worry. >> This are screws, M6, but they have no head. >> You cannot remove them with a tool. >> Put a point exact in the middle and dril them carefully up. >> First 2 mm, least 6,5 mm. >> When the cover is away you can screw them up with a pliers. >> Believe me, it is really easy. >> The new crown has normal screws. >> >> Good luck >> >> Ralph >> >> -----Urspr�ngliche Nachricht----- >> Von: John G. Laurenson, Jr. [mailto:[EMAIL PROTECTED]] >> Gesendet: Freitag, 20. Oktober 2000 23:47 >> An: [EMAIL PROTECTED] >> Betreff: HELP >> >> >> OK, >> >> I feel like a real stupe.......I'm putting on the handle bar mod. >> What is the trick to removing the lock from the stock bar crown? I >> can't find a bolt or a screw to remove to take it off. It look's like >> it is pressed on with the two pins. >> >> respond [EMAIL PROTECTED] >> >> thanks >> >> hawke >> </x-charset> > > ------ End of Forwarded Message ------ End of Forwarded Message
