Shawn, If you are looking for definition of the O-ring that fits between the two halves of the caliper, good luck. I was not able to locate any picture/diagram that even shows it. When I rebuild my rear caliper in a couple of weeks I will measure the o-ring and go to the local auto parts place for a replacement. If you locate any info. about the o-ring, please put it on the list.
Thanks, Jeff B. -----Original Message----- From: Grant Gall [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 26, 2002 8:08 AM To: [EMAIL PROTECTED] Subject: Brake O-ring Seals Shawn, "I'm searching for dimensions of the o-ring seals (admittedly haven't pulled out the manual yet) and will go to a local industrial supplier for replacements...should be 2-3$ each I'm told by my Ducati friends....some special material (starts with a "B"...but I'm brain dead this morning!)" I do believe you mean Buna-N. But make sure you are sure BEFORE ordering. Specific rubbers (back off S/A's) do weird things when introduced to different chemicals. $2 - $3 each would be very expensive, unless those shops have a minimum charge they make you pay. My .02. Grant Gall
