Hello all. I need to order a set of Stainless lines for my GTS. Who is the source for these lines?
On another front, I have attained a drawing of the Spanner wrenches for adjusting the rear shock absorber. From the drawings I have digitized the outline for the spanner wrench that does not come with the '93 GTS's. From that outline I have created a G-Code file that I can process in my plasma cutter. The short version = I can produce the spanner wrenches as needed. The one that I cut for my bike is cut out of mild steel plate and works well. If anyone would like one of these wrenches just email me. Cost is $3.00 to cover the USPS shipping and I will send you one. -things to note, these are cut with a plasma cutter, not a laser and not punched so the edges are not as clean as the factory wrenches. they are also made of mild steel so if you don't paint them they will eventually rust.- I saw 2 other GTS's at Americade last week. Someone put their card on my GTS. I don't remember who it was, the card is in with my other Americade papers that will get organized this week sometime. While at Americade I test rode an Aprilia SL1000 Falco. The bike is neat, and oozes character. It was my first ride on a twin and it was interesting. The engine seems lumpy compared to my GTS, and my WR. The suspension and chassis felt very stable and well sorted. After riding the Falco and jumping back on the GTS, the GTS feels like you are driving the bike vs the Falco you are part of the package. Now I have to ride a SuperHawk to see how it compares. Thanks for the info, Louis Tweed
