Wow, excellent info !!  If I can find a place that sells bearings, I might
be able to get it cheaper....  THIS needs to go onto everybodys GTS website
!!

-----Original Message-----
From: wghalley [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, September 10, 2002 11:28 PM
To: [EMAIL PROTECTED]
Subject: Re: Lube of rear swingarm


Jon
It wasn't dificult, just a PITA.  Someone mentioned the centerstand
interference problem.  I did not have the special tool.  Just an arbor
press - useful for getting the bearings out and the new ones in straight
& a selection of sockets of various sizes.  Two of the bearings in the
relay arm cannot be pushed through as there is a step machined in the
bore they seat against.  With a little ingenuity you can drift each one
out from the opposite side.  Be careful of the bore but don't worry
about the bearing.  When installing the new ones BE careful as some of
the bearings only have a seal on one end that needs to face out.

I didn't try to match them up but I did write down the numbers, so any
bearing place should be able to match them.

For the 1993:
RELAY ARM
Quantity        Yamaha Pt. #    Mfg     Mfg Part #
description
2               93317-41761             KOYO    BHKM1730JU
NEEDLE BEARING
1               93317-42060             KOYO    BKM2035JUU
NEEDLE BEARING
1               93399-99919             -       -
spherical BEARING
2               93101-16131             KCR     MHS 16.5 26 5.5J
SEALS

Swing Arm
2               93317-41761             KOYO    BHKM1730JU
NEEDLE BEARING
2               93317-52865             NTN     7E-HMK 2830
NEEDLE BEARING

Hope this helps
Bill

The information contained in this e-mail including any attachments may
constitute Corvis Corporation Proprietary Information that is subject to
Non-Disclosure Agreement and cannot be disclosed to any other party without
the express consent of  Corvis Corporation.  If you are neither the intended
recipient of this e-mail nor responsible for delivering this e-mail to the
intended recipient, note that any dissemination, distribution, copying, or
retention of this e-mail is prohibited.  If you believe you have received
this e-mail in error, we request that you notify the sender by return e-mail
and then delete this e-mail  and any return e-mail immediately.

Reply via email to