Woot!
As I also have an x60 and I would be very interested in the installer
you used to get things this far if you are able to provide it somewhere?
If not, then I will simply use your achievement as motivation to build
one myself :-)
Best wishes,
Alex
David Thompson writes:
> Ludovic Courtès <l...@gnu.org> writes:
>
>> David Thompson <dthomps...@worcester.edu> skribis:
>>
>>> ext2fs_check_if_mount: Can't check if filesystem is mounted due to
>>> missing mtab file when determining whether /dev/sdb1 is mounted.
>>> fsck.ext4: No such device or address while trying to open /dev/sdb1
>>> Possibily non-existent or swap device?
>>> 'fsck.ext4' exited with code 8 on /dev/sdb1
>>
>> It could be that (1) it’s not called that way, or (2) additional kernel
>> modules need to be loaded so that the device is visible.
>>
>> For (1), you could try using a partition label rather than the actual
>> device name in the ‘file-system’ declaration.
>>
>> For (2), you could check in the kernel log whether sdb is detected.
>
> The problem was a little bit of 1 and 2.
>
> When I am installing, the disk is known as sdb, but when I boot it's
> known as sda. So, I made that change in the file-system declaration.
>
> The initrd doesn't have modules for ahci by default, so I took a little
> snippet that Mark Weaver was using in his operating-system declaration:
>
> (initrd (cut base-initrd <> #:extra-modules '("libahci.ko" "ahci.ko")))
>
> And now for the best news: I have a working installation of the GNU
> system! Thanks for all of your help!
--
Sent with my mu4e
