Buanas noches... (todos)
No encontraba la direcci�n de donde estaba el "Sane"
>Alguien ha puesto uno paralelo de esos " Tres patitos que venden baratos "
Si yo tengo un Plustek OpticPro 9636T conectado al puerto paralelo, tabajando
bastante mejor que en W$ un poco tedioso y poco explicada la instalasi�n desde
"sane" pero funciona bien al final.
La lista de los escaner soportados por SANE est� en:
-----------------------------------------------------------
2.4. Is my-favorite-scanner supported by SANE ?
First of all, see http://www.mostang.com/sane/sane-backends.html for a list of
supported scanners.
Note that some scanners are supported by a different backend than the one
expected. (Manufacturer is not always the same as seller). If your scanner is
not in this list but comes from a manufacturer that build already supported
scanners of the same type (SCSI, PARALLEL, USB, ...), try it anyway. If you
have some success with this, please report it to [EMAIL PROTECTED] ! (Read
the man for the specific backend for help on how to enable extra debug output).
Your scanner may be partially supported. (Only black/white, only 300 dpi, only
24 bits, ...).
--------------------------------------------------------------
2.6. Is my-favorite-PARALLEL-scanner supported by SANE ?
Supporting PARALLEL scanners is (really) harder than supporting SCSI scanners.
First of all, you need to understand that each manufacturer (and sometime even
each scanner) have their own command set. There is no such thing as a common
set of commands as in SCSI. In order to support a given PARALLEL scanner, one
need to obtain the FULL specification from the manufacturer. This is, in fact,
the real obstacle to a more complete parallel scanner support, because many
manufacturers won't give specs for their scanners.
A good few parallel scanners work under Sane. These include a raft of HP and Epson
models.
Some other parallel scanners are also supported. For further details please
see http://www.buzzard.org.uk/jonathan/scanners.html
--
�Desea desuscribirse? Escriba a [EMAIL PROTECTED] con
el tema "unsubscribe".
