En el README de LILO (en slack esta en /usr/doc/lilo-{ver}/README), viene
una explicacion de los mensaje de LILO.
LILO start message
- - - - - - - - -
...
(<nothing>) No part of LILO has been loaded. LILO either isn't
installed
or the partition on which its boot sector is located isn't active.
L <error> ... The first stage boot loader has been loaded and
started,
but it can't load the second stage boot loader. The two-digit error
codes indicate the type of problem. (See also section "Disk error
codes".) This condition usually indicates a media failure or a
geometry
mismatch (e.g. bad disk parameters, see section "Disk geometry").
LI The first stage boot loader was able to load the second stage boot
loader, but has failed to execute it. This can either be caused by a
geometry mismatch or by moving /boot/boot.b without running the map
installer.
LIL The second stage boot loader has been started, but it can't load
the descriptor table from the map file. This is typically caused by a
media failure or by a geometry mismatch.
LIL? The second stage boot loader has been loaded at an incorrect
address. This is typically caused by a subtle geometry mismatch or by
moving /boot/boot.b without running the map installer.
LIL- The descriptor table is corrupt. This can either be caused by a
geometry mismatch or by moving /boot/map without running the map
installer.
LILO All parts of LILO have been successfully loaded.
--
El porque suceda cada cierto tiempo, legalmente esta maluco... Por mera
diversion, seria bueno hecharle la culpa a guindos ;)... varas...
--
Alvaro Figueroa C. I'm the root
Universidad Latina de CR and you're the hood
Departamento de Computo I have other souls in my hands
--
�Desea desuscribirse? Escriba a [EMAIL PROTECTED] con
el tema "unsubscribe".
