On Tuesday 01 February 2005 12:59, magnus anderssen wrote: > noyau 2.6?
Oui. 2.6.8 > il me semble qu'il y a pas mal de problÃme avec cdrecord. Oui, et les petites histoires d'ego de certains developeurs n'arrange rien. > Il est vrai que je dois, pour graver, lancer la gravure en root (au > travers de k3b) Ca aussi ce n'est vraiment pas clean du tout :-( > cdrecord (Cdrecord-Clone 2.01 (i686-pc-linux-gnu)) ne voit pas mon > graveur non plus, mais Ãa eu marchÃ, je vais faire un backup serveur ce > soir pour Ãtre sÃr. > magnus je crois qu j'avais essayer de recompiler tous les sources des packages impliques, mais ca c'etait plante quelque part... c'est la que j'ai abandonne. Ca-y-est... j'ai retrouve l'output de K3B :-) Ce que je ne pige pas, c'est le : Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Ah bon... pourtant j'ai deja grave plus d'une dizaine de ces disques auparavant. Si quelqu'un voit quelque chose... dc ****** kdb.out ************ System ----------------------- K3b Version:0.11.12 KDE Version: 3.3.0 QT Version: 3.3.3 cdrecord ----------------------- ZYÂ $Ã : Operation not permitted. WARNING: Cannot set RR-scheduler ZYÂ $Ã : Permission denied. WARNING: Cannot set priority using setpriority(). ZYÂ $Ã : WARNING: This causes a high risk for buffer underruns. /usr/bin/cdrecord: No such file or directory. WARNING: Cannot do mlockall(2). /usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns. /usr/bin/cdrecord: Warning: not running as root user, fs= option ignored. scsidev: '/dev/hdc' devname: '/dev/hdc' scsibus: -2 target: -2 lun: -2 Linux sg driver version: 3.5.27 /usr/bin/cdrecord: Warning: using inofficial libscg transport code version ([EMAIL PROTECTED] '@(#)scsi-linux-sg.c 1.80 04/03/08 Copyright 1997 J. Schilling'). SCSI buffer size: 64512 Cdrecord-Clone-dvd 2.01a27 (i686-suse-linux) Copyright (C) 1995-2004 JÃÂrg Schilling Note: This version is an unofficial (modified) version with DVD support Note: and therefore may have bugs that are not present in the original. Note: Please send bug reports or support requests to http://www.suse.de/feedback Note: The author of cdrecord should not be bothered with problems in this version. TOC Type: 1 = CD-ROM Using libscg version 'schily-0.8'. Driveropts: 'burnfree' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-106D' Revision : '1.06' Device seems to be: Generic mmc2 DVD-R/DVD-RW. Current: 0x000A Profile: 0x001B Profile: 0x001A Profile: 0x0014 Profile: 0x0013 Profile: 0x0011 Profile: 0x0010 Profile: 0x000A (current) Profile: 0x0009 (current) Profile: 0x0008 Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). Driver flags : MMC-3 SWABAUDIO BURNFREE Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R Drive buf size : 1267712 = 1238 KB FIFO size : 4194304 = 4096 KB Track 01: data 19 MB Total size: 22 MB (02:15.37) = 10153 sectors Lout start: 23 MB (02:17/28) = 10153 sectors Current Secsize: 2048 ATIP info from disk: Indicated writing power: 5 Reference speed: 2 Is not unrestricted Is erasable ATIP start of lead in: -11930 (97:22/70) ATIP start of lead out: 335975 (74:41/50) 1T speed low: 0 (reserved val 0) 1T speed high: 4 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 10) power mult factor: 3 5 recommended erase/write power: 2 A1 values: 02 3A A0 A2 values: 5A A6 14 Disk type: unknown dye (reserved id code) Manuf. index: -1 Manufacturer: unknown (not in table) Manufacturer is unknown because of the orange forum embargo. As the orange forum likes to get money for recent information, it may be that this media does not use illegal manufacturer coding. Blocks total: 335975 Blocks current: 335975 Blocks remaining: 325822 Starting to write CD/DVD at speed 4.0 in real SAO mode for single session. Last chance to quit, starting real write in 2 seconds. 1 seconds. 0 seconds. Operation starts. Waiting for reader process to fill input buffer ... input buffer ready. trackno=0 BURN-Free is OFF. Turning BURN-Free on Performing OPC... Sending CUE sheet... Writing pregap for track 1 at -150 Starting new track at sector: 0 Track 01: 0 of 19 MB written. /usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error CDB: 2A 00 00 00 00 00 00 00 1F 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 05 00 00 00 00 0E 00 00 00 00 30 05 00 00 Sense Key: 0x5 Illegal Request, Segment 0 Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 Sense flags: Blk 0 (not valid) resid: 63488 cmd finished after 0.005s timeout 200s /usr/bin/cdrecord: A write error occured. /usr/bin/cdrecord: Please properly read the error message above. write track data: error after 0 bytes Writing time: 55.457s Average write speed 0.3x. Fixating... Fixating time: 0.011s /usr/bin/cdrecord: fifo had 64 puts and 1 gets. /usr/bin/cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. cdrecord comand: ----------------------- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=4 -dao driveropts=burnfree -eject -overburn -data -tsize=10153s - mkisofs ----------------------- 10153 INFO: UTF-8 character encoding detected by locale settings. Assuming UTF-8 encoded filenames on source filesystem, use -input-charset to override. 4.97% done, estimate finish Mon Oct 4 22:01:29 2004 9.86% done, estimate finish Mon Oct 4 22:01:29 2004 14.90% done, estimate finish Mon Oct 4 22:01:29 2004 19.79% done, estimate finish Mon Oct 4 22:01:29 2004 mkisofs comand: ----------------------- /usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset -appid K3B THE CD KREATOR VERSION 0.11.12 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -publisher -preparer K3b - Version 0.11.12 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-dc/k3bWbt3ba.tmp -rational-rock -hide-list /tmp/kde-dc/k3bYOR4Xa.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-dc/k3b9owg2b.tmp _______________________________________________ gull mailing list [email protected] http://lists.alphanet.ch/mailman/listinfo/gull
