Hi! I have tested the new gvSIG3D build in Windows 7 and it does open raster files but it is very slow.
In Gvsig 1.1.2 with 3D pilot and Windows XP everything is fine, I can open: Raster dem with overlays like Ortophoto (raster) several shp-files type water, roads, buildings elevation curves etc and everything goes smooth, I can zoom, rotate etc. I can use it to show interactiv to an audiens. In Gvsig 1.9 3D build11 and Windows 7 or Windows XP you can open: Raster dem with overlays but only 1 overlay shows at atime, if you check the layers in the layerlist only the overlay at the bottom of the layerlist is visible If you uncheck the overlay at the bottom of the layerlist, the next overlay is visible etc. With overlaying with Ortophoto (raster) I also see a grid Everything is very slow, zooming, panning etc is very jumpy. It feels like all resources on the computer is used. I hope that the funcionality of Gvsig 1.1.2 with 3D pilot can be reached with gvSIG3D build in Windows 7 Lars-Göran Edholm
_______________________________________________ Gvsig_internacional mailing list [email protected] http://listserv.gva.es/cgi-bin/mailman/listinfo/gvsig_internacional
