Re: remote desktop, citrix etc.

Fri, 25 Sep 2009 17:04:13 -0700 

Mark,
As Aaron stated, the only requirement is that the server (the machine you are connecting to) must have Window-Eyes installed. The client end does NOT have to have Window-Eyes installed although if it does then you can use the virtual channel for the synthesizer making things much more responsive. But this is the only benefit of having Window-Eyes on the client. 


So to answer your specific question of if you have a Windows XP system, 
can you connect to some other Windows machine, yes, as long as the 
machine you are connecting to is a system that Window-Eyes supports and 
has Window-Eyes setup and running correctly as per the Window-Eyes 
documentation.


Regards,
Doug

Marek Durila wrote:

Hi,
It'm means, that if I'm running win XP and I wanted connect to the some
windows machine of my client, I can do it?
With best regards,
   Marek Durila

IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo: Brno,
Technická 2995/21, PSC 61600
IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v Brne
oddíl C, vložka 39922
IBM Global Services Delivery Center Czech Republic, s.r.o., Registered
address: Brno, Technicka 2995/21, Zip code: 61600
Company ID: 26244535, Entered in the Commercial Register maintained by the
Regional Court in Brno (Part C, Entry 39922)




                                                                           
             Aaron Smith                                                   
             <[email protected]                                             
             m>                                                         To 
                                       Marek Durila/Czech                  
             25/09/2009 14:08          Republic/i...@ibmcz                  
                                                                        cc 
                                       [email protected]                 
             Please respond to                                     Subject 
             [email protected]         Re: remote desktop, citrix etc.     
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           
                                                                           





Marek,

For Citrix/RDP support, Window-Eyes must be installed on the machine
that you are connecting to, but does not need to be on the machine
you're connecting from. For example, I could connect from a Linux
system, where Window-Eyes doesn't run at all, to a Windows machine
through RDP, and have full Window-Eyes support for that Windows
environment.

Aaron

On 9/24/2009 8:13 PM, Marek Durila wrote:

  

Hi all,
I downloadet now version 7.1.1 demo, because our local dealer is death

    

and

  

we don't have possibility buy a licence, what's pity.
But I'm having question.
We are working with clients, repair their servers, run services etc.
I read the manual section about Citrix and Remote Desktop, and I
understand, that you must running WindowEyes in my local machine, from
which I'll need connect to the server and on the server, which I want run
some service etc.
That's true? Because it means, that we must have 3000 licences for every
server, what isn't possible.
With best regards,
    Marek Durila

IBM Global Services Delivery Center Czech Republic, s.r.o., Sídlo: Brno,
Technická 2995/21, PSC 61600
IC: 26244535, Zapsaná v obchodním rejstríku, vedeném Krajským soudem v

    

Brne

  

oddíl C, vložka 39922
IBM Global Services Delivery Center Czech Republic, s.r.o., Registered
address: Brno, Technicka 2995/21, Zip code: 61600
Company ID: 26244535, Entered in the Commercial Register maintained by

    

the

  

Regional Court in Brno (Part C, Entry 39922)If you reply to this message

    

it will be delivered to the original sender only.  If your reply would
benefit others on the list and  your message is related to GW Micro, then
please consider sending your message to [email protected] so the entire
list will receive it. All GW-Info messages are archived at
http://www.gwmicro.com/gwinfo, and can be searched through and sorted using
the searchform at the bottom of the page.  If you wish to unsubscribe from
this list, send a message [email protected] and include leave gw-info
in the body  of the message.

--
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information
pertinent to your situation when submitting a problem report to the GW
Micro Technical Support Team.

Aaron Smith
GW Micro
Phone: 260/489-3671
Fax: 260/489-2608
WWW: http://www.gwmicro.com
FTP: ftp://ftp.gwmicro.com
Technical Support & Web Development
If you reply to this message it will be delivered to the original sender only.  
If your reply would benefit others on the list and  your message is related to 
GW Micro, then please consider sending your message to [email protected] so 
the entire list will receive it. All GW-Info messages are archived at 
http://www.gwmicro.com/gwinfo, and can be searched through and sorted using the 
searchform at the bottom of the page.  If you wish to unsubscribe from this 
list, send a message [email protected] and include leave gw-info in the 
body  of the message.



If you reply to this message it will be delivered to the original
sender only.  If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to [email protected] so the entire list will receive it.

All GW-Info messages are archived at http://www.gwmicro.com/gwinfo, and can be 
searched through and sorted using the search

form at the bottom of the page. 


If you wish to unsubscribe from this list, send a message to

[email protected] and include leave gw-info in the body 
of the message.




















					Reply via email to