Hi gang,
First of all, much thanks to Aaron, Tom, and others who are working
on this, this will make a lot of things possible with we for the
non-programming or scripting crowd, similar to what snowman's script
hot spot clicker does for jaws.
It has a way to go to get that good, but it took years of work for
that package, and I'm just so pleased that something like that is
developing for we.
Ok, I have been working diligently with hotspot and managed to get
sfz for sonar 8.5.2 spotted.
While doing so, I noticed that the mouse doesn't always get put in
the right place, even if you use the use current mouse setting.
But I managed to get the 8 or so spotts done in that app.
I also tried to spot the latency slider in the delta card control
pannel in w7 64 bit, that delta 44 pannel is not nearly as accessible
as the older one, but there is a button which I defined a window
around in a setfile to ramp the latency down but with hot spot I
could never make the mouse go to the right place.
Even when the numbers were right, when I checked the mouse
cordinates, the numbers would always be wrong.
Also there is something else to consider.
We need a different way to get top level window names if not exactly
like jaws hsc does, something more robust than we have and this is why.
I started spotting session drummer 3 which I've done extensive
set files for and also hsc sets and I sell that for a modest price
for access to that plug-in.
But there is no way to separate those spots from say, the sfz spots,
because they're all lumped under sonarpdr.
We need a way to differentiate plug-ins from the main app.
Maybe hard-wire the code to look for a window title or something.
Because sonar can have dozens of plug-ins and your going to run out
of hot-keys or have spots triggering in un-desirable places if
everything is active all the time.
Maybe this can be accomplished by putting all the spots in one place,
but this is the reason I thought maybe doing spots in separate files
might work better, but I'm not a programmer, maybe you could
accomplish the same thing but have sections differientiated in one file.
But regardless of the current limitations, thanks a bunch for
bringing this script along, it wasn't useable before, and at least
now, it works for some things and is getting better.
Now I got a question, since window-eyes native route mouse to window
works very well for exact placement of the mouse, is there a way to
finger a set-file for window cordinates and make the mouse obey that
criteria, and would that maybe make the mouse placement more accurate?
I'm fishing here, but something we does natively gets the job done
better than the script does, and if we could tune in to that somehow,
would it help?
Or could the script immulate what we does?
I have no idea what might be messing the script up from finding the
mouse cordinates in those situations where it does, but it's a thought anyway.
Bye for now, and I'll be giving this script a thorough workout to see
what-else works well and what doesn't.
At 11:01 AM 4/11/2010, Aaron Smith wrote:
This will be fixed in the next version.
Aron
On 4/11/2010 11:14 AM, shannon wrote:
I was just going to continue and see what would happen if I made
some change to the two measurement boxes and when I pressed enter I
got an error message. I sent it off with my comments. So there is
something wrong with my trying to use the hot spot for my purpose.
I 'll wait and see if there is any feed back from aaron on this.
Maybe it just won't work for me.
Shannon
----- Original Message -----
From: <mailto:[email protected]>shannon
To: <mailto:[email protected]>[email protected]
Sent: Sunday, April 11, 2010 9:44 AM
Subject: Hot Spot 3.0.1
good morning,
I am trying to play around with the new hotspot and I am not
getting something right.
I thought I might try to use this script to read an anoying pop up
window but after I get my mouse to the text that is in this short
lived window and press the control alt p to secure the mouse
cordinates the actions exicute hot key is empty.
I am placed in an empty bosx that is a read only and the other two
places here are the mouse direction and the delay. I can't chose
any hot key to excicute.
What is wrong? Why are there no hot keys to chose from. I was
looking for the read current line hot key but there aren't any keys
to chose from.
Have I not done something right?
Shannon
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to <mailto:[email protected]>[email protected] so
the entire list will receive it.
GW-Info messages are archived at
<http://www.gwmicro.com/gwinfo>http://www.gwmicro.com/gwinfo. You
can manage your list subscription at
<http://www.gwmicro.com/listserv>http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and
your message is related to GW Micro, then please consider sending
your message to <mailto:[email protected]>[email protected] so
the entire list will receive it.
GW-Info messages are archived at
<http://www.gwmicro.com/gwinfo>http://www.gwmicro.com/gwinfo. You
can manage your list subscription at
<http://www.gwmicro.com/listserv>http://www.gwmicro.com/listserv.
--
Aaron Smith
Product Support Specialist * Web Development
GW Micro, Inc. * 725 Airport North Office Park, Fort Wayne, IN 46825
260-489-3671 * gwmicro.com
To insure that you receive proper support, please include all past
correspondence (where applicable), and any relevant information
pertinent to your situation when submitting a problem report to the GW
Micro Technical Support Team.
If you reply to this message it will be delivered to the original
sender only. If your reply would benefit others on the list and your
message is related to GW Micro, then please consider sending your
message to [email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You
can manage your list subscription at http://www.gwmicro.com/listserv.
WARNING!!!
This email could contain innocent phrases which, if taken out of
context, or read from an existing inclination to be hostile, or an
overly politically correct world view could induce cursing, abusive
language, or other indications of less than desirable behavior in a
public venue.
No ill will is intended.
The sender takes no responsibility for mis-interpretation or
otherwise extrapolated extended meaning, intent, or purposes implied
or imagined from said phrases.
The receiver of any such email containing such phrases is solely
responsible for good
interpretation and intelligent deployment of subsequent responses to
the above communication.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
