Hi all. In regards to a earlier post from me last week enquiring if anyone knows of any hardware weather stations that will work with w.e.
Ok. I had a look around, ebay mostly, and found a pro weather station, that's what they are listed as, that uses pc software called EZ weather. The hardware is a pro weather station by Tycon The non touch screen model.... Anyways. Bottom line is that the software works just fine with w.e. after making a few user windows. The unit reads, Indoor temp and humidity. Outdoor temp, humidity, barometric pressure, wind speed gust direction chill, dew point rainfall, The software also displays the min max of all the readings for the day month etc. All works just fine.. http://www.proweatherstation.com/ I did have to get my wife to give me a hand bolting the outdoor sensors together, Took all of five mins to do, and then a small amount of sighted help to make sure the user windows I was setting up were for the readings I wanted. i.e. making sure the outdoor temp was reading the current outdoor temp , not the min or max from the last 24 hours etc. I got mine off ebay for sub 100 bux Australian delivered. Hope this is of some use to some one. J.J. If you reply to this message it will be delivered to the original sender only. If your reply would benefit others on the list and your message is related to GW Micro, then please consider sending your message to [email protected] so the entire list will receive it. GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage your list subscription at http://www.gwmicro.com/listserv.
