Hi Again Norene,
This is the article that explains what to do.
GW Micro - Unleashing the power of your mind's eye.
Knowledge Base
>> GWKB1022
GW Micro - Support - Knowledge Base - GWKB1022
GWKB1022 : Speech Parameter Hot Keys Do Not Speak
Product
Window-Eyes
Category
:
Window-Eyes
Author
:
Aaron Smith
Date Added
: 09/22/2005
Last Modified
: 06/09/2009
Symptom:
Using Window-Eyes 5.0, or greater, when pressing the Speech Parameters hot keys
(CTRL-ALT-ARROW KEYS by default) Window-Eyes will not indicate the current
speech
parameter setting.
Cause:
An Intel video application running in the background uses these keys to modify
various
video settings, such as screen rotation.
Solution: You will need to disable the Intel hot keys, by performing the
following
general steps:
1. Open the Windows control panels
2. Open the Display control panel
3. Select the Settings tab
4. Select the Advanced button
5. Select the Intel(R) Extreme Graphics option
6. Select the Graphics Properties option
7. Select the HotKeys option
8. Uncheck Enable Hot Keys option
You may also be able to open the Graphic Properties options using CTRL-ALT-F12.
Sent: Friday, January 07, 2011 11:54 AM
Subject: Re: Problem with outlet express and changing voices
Hi,
No, I do not have a laptop. I have a desktop computer. I know very little
about fixing anything, however, how do I upright a flipped screen? I may need
sighted help for this, yes? Books for dummies are my style. Smile! Thanks in
advance.
Norene
----- Original Message -----
From: BT
To: NORENE TRAPPA
Cc: GW Info List
Sent: Tuesday, January 04, 2011 5:06 PM
Subject: Re: Problem with outlet express and changing voices
Hi Norene,
Do you have a laptop? If you have a laptop then you might have a video
card conflict and have to go to the control panel and turn off the video card
hot keys.
Only in laptops does this show up. You may also be flipping your screen
orientation if this is the case and may have to first upright your screen
before shutting off the keys.
Bruce
Sent: Tuesday, January 04, 2011 5:59 PM
Subject: Problem with outlet express and changing voices
Hi, While attempting to increase or change rate, tone, pitch or volume in
any program, down arrow works fine, however, up arrow always goes back to OE
without any change. Insert-V does the same thing. Has something changed in
W-E or do I need to make a change somewhere. I am using XP sp3 and W-E 6.1. I
know I should upgrade the W-E 6.1 soon. Any help will be appreciated, and
thanks in advance.
Norene
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
