----- Original Message -----
From: "Duyahn Walker" <[email protected]>
To: <[email protected]>
Sent: Friday, July 22, 2011 10:11 AM
Subject: Re: read to end with Dectalk express
Hi Steve:
I am in Notepad when I issue this command. i have not tried Microsoft
office 2003, or Wordpad.
Duyahn Walker
----- Original Message -----
From: "Stephen Clower" <[email protected]>
To: "Duyahn Walker" <[email protected]>
Cc: <[email protected]>
Sent: Friday, July 22, 2011 7:03 AM
Subject: Re: read to end with Dectalk express
Hello Duyahn,
Which program are you in when you issue the Read-To-End command? Does
this happen everywhere, or just inside this specific application?
regards,
Steve
On 7/21/2011 9:14 PM, Duyahn Walker wrote:
Ok. I'm really not sure as to why this is going on but, here is my
issue. I am using Dectalk Express as the default speech synthesizer and
I have the latest version of Window eyes. I am also running Windows xp
home edition. When the Dectalk Express is selected, and the document is
open that I want to read, I press the ctrl-shift-r command to start the
reading to end sequence. Dectalk Express will read the top line, then
stop. I even waited a full five minutes before I started up the command
again. If I do the command again, it acts fine. i have checked
everything to make sure there is no interfeerence from anything but,
nothing has worked. I have tried Eloquence, and the Dectalk Access32
software with this same command and there are no issues. My DecTalk is
set to Com 4 and I am using a USB to serial cable so that the Dec
Express can work. If anyone has run in to this or if anyone has some
suggestions, i am all for them.
Thanks for any and all help
Duyahn Walker
--
Stephen Clower
Product support specialist
GW Micro, Inc. * 725 Airport North Office Park, Fort Wayne, IN 46825
260-489-3671 * gwmicro.com
If you reply to this message it will be delivered to the original sender
only. If your reply would benefit others on the list and your message is
related to GW Micro, then please consider sending your message to
[email protected] so the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can
manage your list subscription at http://www.gwmicro.com/listserv.
If you reply to this message it will be delivered to the original sender only.
If your reply would benefit others on the list and your message is related to
GW Micro, then please consider sending your message to [email protected] so
the entire list will receive it.
GW-Info messages are archived at http://www.gwmicro.com/gwinfo. You can manage
your list subscription at http://www.gwmicro.com/listserv.
